< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Steering Arms, Links & Rods
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Rod Kit, Steering Linkage Outer Tie
PartNumber: 15254061
Product Specifications- Notes: 1/2 Ton; Yukon Xl, Suburban
- Location: Passenger Side; Driver Side
- Other Names: Outer Tie Rod
- Item Dimensions: 6.1 x 5.7 x 5.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Rod Kit, Steering Linkage Outer Tie
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$102.60 MSRP:$178.59You Save: $75.99 (43%)
Delphi® Outer Steering Tie Rod End for 2009 Chevrolet Suburban 1500
PartNumber: TA2788Product Specifications- Adjustable: No
- Bearing Material: Plastic
- Color: Black
- Dust Boot Included: Yes
- Dust Boot Material: CR
- End 1 Gender: Female
- End 1 Thread Diameter: 16.00
- End 1 Thread Direction: Clockwise
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- End 2 Thread Diameter: 14.00
- End 2 Thread Direction: Clockwise
- Finish: Chrome Plating
- Grade: Standard
- Greasable: No
- Grease Fitting Included: No
- Height: 105.00
- Housing Material: Steel
- Item Grade: Standard Replacement
- Length: 162.00
- Length Stud Center to End: 141.00
- Mounting Hardware Included: Yes
- Pre-Greased: No
- Stud Type: Threaded
- Tie Rod Material: Steel
- UPC: 689604270325
- Weight: 1.278668
- Width: 43.00
- Part Description: 2009 Chevrolet Suburban 1500 Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS | 8 Cyl 5.3L
- 2009 Chevrolet Suburban 1500 | LT | 8 Cyl 5.3L
- 2009 Chevrolet Suburban 1500 | LTZ | 8 Cyl 5.3L
- 2009 Chevrolet Suburban 1500 | LT | 8 Cyl 6.0L
- 2009 Chevrolet Suburban 1500 | LTZ | 8 Cyl 6.0L
$17.51
OEM (Genuine) 2009 Chevrolet Suburban 1500 Outer Tie Rod
PartNumber: 19352244
Product Specifications- Notes: Yukon Xl, Suburban
- Other Names: Outer Tie Rod
- Item Dimensions: 5.9 x 2.8 x 10.7 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19303461, 12471649, 15891515
- Replaced by: 86511721
- Part Description: 2009 Chevrolet Suburban 1500 Outer Tie Rod
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$89.53 MSRP:$148.19You Save: $58.66 (40%)
Centric® Premium™ Front Outer Steering Tie Rod End for 2009 Chevrolet Suburban 1500
PartNumber: 612.66044Product Specifications- UPC: 805890804970
- Part Description: 2009 Chevrolet Suburban 1500 Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | All Engines
$16.75
Centric® Premium™ Front Inner Steering Tie Rod End for 2009 Chevrolet Suburban 1500
PartNumber: 612.66043Product Specifications- UPC: 805890804963
- Part Description: 2009 Chevrolet Suburban 1500 Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: What is the recommended torque when installing the Steering Linkage Inner Tie Rod Nut?
A:
The recommended torque is 75 Nm(55 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do I remove the Steering Linkage Inner Tie Rod?
A:
You should remove the engine shield, remove the steering linkage outer tie rod and remove the steering linkage inner tie rod from the relay rod using wrench J 34028.
By Bob
GM Specialist
01/11/2022Q: How to replace the Steering Linkage Outer Tie Rod?
A:
You should use puller J 24319-B to separate the steering linkage outer tie rod from the steering knuckle, inspect the steering linkage inner tie rod for bent or damaged threads, clean the tapered surface of the steering knuckle, lubricate the steering linkage inner tie rod threads with chassis lubricant and adjust the front toe.
By Bob
GM Specialist
01/11/2022Q: How do I install the Steering Linkage Inner Tie Rod?
A:
You should remove all traces of oil, grease, or other contaminants, clean the threads of the steering linkage inner tie rod with denatured alcohol or the equivalent and allow to dry, apply red LOCTITE(TM)threadlocker, GM P/N 12345493 (Canadian P/N 10953488) to the threads of the steering linkage inner tie rod, install the steering linkage inner tie rod to the relay rod using wrench J 34028, install the steering linkage outer tie rod, install the engine shield and adjust the front toe.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Steering Linkage Inner Tie Rod (Standard)?
A:
You should remove the steering gear boot, place a pipe wrench on the flats on the steering gear rack next to the steering linkage inner tie rod, place a wrench on the flats of the steering linkage inner tie rod and rotate the steering linkage inner tie rod counterclockwise while holding the steering gear rack stationary until the steering linkage inner tie rod separates from the steering gear rack.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Rear Axle Tie Rod Mounting Bolt?
A:
You should support the rear drive axle before removing either of the mounting bolts and finger-tighten the mounting bolt. This will allow for movement in the rear axle tie rod to align the opposite end mounting bolt and hole.
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Rear Axle Tie Rod replacement?
A:
You should raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do I install the Steering Linkage Inner Tie Rod (Standard)?
A:
You should apply LOCTITE(R)262, or equivalent, to the steering gear inner tie rod threads, attach the steering linkage inner tie rod onto the steering gear rack, place a pipe wrench on the flats on the steering gear rack next to the steering linkage inner tie rod, tighten the steering linkage inner tie rod and install the steering gear boot.
By Bob
GM Specialist
01/11/2022See more FAQs (3)