< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Release Switch
PartNumber: 15798062
Product Specifications- Notes: Chevrolet, Lift Gate Window
- Other Names: Release Switch
- Item Dimensions: 2.3 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22863048
- Part Description: 2009 Chevrolet Suburban 1500 Release Switch
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$40.04 MSRP:$62.98You Save: $22.94 (37%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Release Switch
PartNumber: 15106857
Product Specifications- Notes: Lift Gate Door
- Other Names: Release Switch
- Item Dimensions: 19.6 x 5.0 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Suburban 1500 Release Switch
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$20.07 MSRP:$30.29You Save: $10.22 (34%)
FAQ for Liftgate Release Switch Repair
Q: How do I remove the Luggage Carrier Nut?
A:
You should remove the luggage carrier, drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit and remove the rivnut from the roof.
By Bob
GM Specialist
01/11/2022Q: How do I install the Luggage Carrier Nut?
A:
You should drill the rivnut hex shape hole in the roof out to a round 10 mm hole, install a replacement rivnut to the hole in the roof, and install the luggage carrier.
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Liftgate Release Switch replacement (Except Avalanche and Escalade EXT)?
A:
You should remove the liftgate handle.
By Bob
GM Specialist
01/11/2022Q: What are the preliminary procedures for Liftgate Actuator Switch replacement?
A:
You should remove the left rear quarter trim panel.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Power Liftgate Switch?
A:
You should cut the tie strap, if equipped, and replace it after the repair, disconnect the electrical connector, and reprogram the power liftgate actuator switch replacement.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the Liftgate Release Switch Screw?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when replacing the Liftgate Release Switch?
A:
You should disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the Power Liftgate Switch Screw?
A:
The recommended torque is 0.2 Nm (1.7 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (3)