2009 Chevrolet Suburban 1500 Floor Pan

You should remove the catalytic converter, remove the muffler assembly and remove the left front floor panel exhaust heat shield nuts and heat shield. If the vehicle is a Tahoe, Yukon, Yukon Denali, or Escalade, you should remove the exhaust heat shield nuts and heat shields. If the vehicle is a Suburban, Yukon XL, Yukon Denali XL, Escalade ESV, Escalade EXT, or an Avalanche, you should remove the exhaust heat shield nuts and heat shields and then remove the rear floor panel exhaust heat shield nuts and heat shield, as required.

You should position the rear floor panel exhaust heat shield to the studs and install the heat shield nuts. If the vehicle is a Suburban, Yukon XL, Yukon Denali XL, Escalade ESV, Escalade EXT, or Avalanche, you should position the exhaust heat shield to the studs and install the heat shield nuts. If the vehicle is a Tahoe, Yukon, Yukon Denali, or Escalade, you should position the exhaust heat shield to the studs and install the heat shield nuts and then position the left front floor panel exhaust heat shield to the studs and install the heat shield nuts, install the muffler assembly and install the catalytic converter.

You should disable the roof rail SIR system, remove the rear seats, remove the rear seat belt buckles, remove the back body opening molding, the back rear corner upper molding, the rear door sill plate, the lock pillar molding, and the body side trim panel.

You should spray GM Vehicle Care Odor Eliminator directly or as an additive with carpet shampoo in steam cleaners. You can not use it on any interior surface that plain water would deteriorate, because this product will have the same effect, and also avoid letting this product come into contact with vinegar or any acidic substance. Acid-based products will hamper the effectiveness of GM Vehicle Care Odor Eliminator. You should complete eight-page treatment sheets enclosed within each case of GM Vehicle Care Odor Eliminator. These treatment instructions range from simple vehicle odor elimination to full step-by-step procedures for odor removal from water leaks. If lost, contact 800-977-4145 to get a replacement set faxed or e-mailed to your dealership. Instructions and cautions are printed on the bottle, but additional help is available. If you encounter a persistent or recurring odor, you may call to obtain additional information and usage suggestions.

For a 1-piece carpet assembly bonded to cotton or fiber padding, you should replace the entire assembly. For a 2-piece carpet assembly with cotton or fiber padding, you should replace the padding only. While the carpet is out of the vehicle, dry the carpet using the method described below. For a 1-piece carpet assembly bonded to foam padding or attached to synthetic padding, you should dry the carpet using the method described below. For a 2-piece carpet assembly with synthetic padding, you should dry the assembly using the method described below.