< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Seal, Engine Front Cover
PartNumber: 12585673
Product Specifications- Notes: Yukon Xl, Suburban
- Item Dimensions: 3.5 x 3.5 x 0.4 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12550565, 12561244
- Part Description: 2009 Chevrolet Suburban 1500 Seal, Engine Front Cover
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$15.05 MSRP:$45.94You Save: $30.89 (68%)
Victor Reinz® Rear Improved Design Crankshaft Seal for 2009 Chevrolet Suburban 1500
PartNumber: 19-10080-01Product Specifications- Notes: 1 Piece;Premium, Improved Design; PTFE Rubber; Rear
- Material: PTFE Rubber
- Part Description: 2009 Chevrolet Suburban 1500 Rear Improved Design Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 6.0L
- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 5.3L
$28.15
OEM (Genuine) 2009 Chevrolet Suburban 1500 Crankshaft Seal
PartNumber: 89060436
Product Specifications- Notes: Yukon Xl, Suburban
- Other Names: Crankshaft Seal, Rear Main Seal
- Item Dimensions: 5.2 x 5.1 x 1.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12585671, 89018162, 12550574
- Part Description: 2009 Chevrolet Suburban 1500 Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$21.94 MSRP:$34.84You Save: $12.90 (38%)
SKF® Rear Crankshaft Seal for 2009 Chevrolet Suburban 1500
PartNumber: 38617Product Specifications- Quantity Per Application: 1
- UPC: 085311492904
- Part Description: 2009 Chevrolet Suburban 1500 Rear Crankshaft Seal
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 5.3L
- 2009 Chevrolet Suburban 1500 | All Trims | 8 Cyl 6.0L
- 2009 Chevrolet Suburban 1500 | All Trims | All Engines
$26.81
FAQ for Crankshaft Seal Repair
Q: How do I remove the Crankshaft Rear Oil Seal Housing?
A:
You should remove the automatic transmission flexplate, remove the oil pan-to-rear oil seal housing bolts, remove the rear oil seal housing bolts, remove the rear oil seal housing and gasket, discard the gasket and remove and discard the rear oil seal.
By Bob
GM Specialist
29/10/2022Q: How do I remove the Crankshaft Front Oil Seal (RPOs LC9/LMG/LY2/LY5)?
A:
You should remove the crankshaft balancer and remove the crankshaft front oil seal from the front cover.
By Bob
GM Specialist
29/10/2022Q: How do I install the Cover with Seal?
A:
You should install the J-41479-2A-guide cone and bolts onto the rear of the crankshaft, install the NEW rear housing gasket, rear housing with a seal, rear housing-to-engine bolts, and oil pan-to-rear housing bolts, tighten the rear housing-to-engine bolts until snug, tighten the oil pan-to-rear housing bolts to 12 Nm(106 lb in), tighten the rear housing-to-engine bolts to 30 Nm(22 lb-ft), remove the J-41479-2A-guide and install the automatic transmission flexplate.
By Bob
GM Specialist
29/10/2022Q: How do I install the Crankshaft Front Oil Seal (RPOs LC9/LMG/LY2/LY5)?
A:
You should lubricate the outer edge of the oil seal with clean engine oil, lubricate the front cover oil seal bore with clean engine oil, install the crankshaft front oil seal onto the J 41478 guide, install the J 41478 threaded rod (with nut, washer, guide, and oil seal) into the end of the crankshaft, use the J 41478 to install the oil seal into the cover bore and install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022