Part Description: 2009 Chevrolet Suburban 1500 Rear View Camera Image Displacement Module Assembly
More Info
Vehicle Fitment
2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Body Control Module Repair
Q: What should we know about the body control module?
A:
Dealers are to confirm vehicle eligibility before beginning repairs by using the GM Vehicle Inquiry System (GMVIS). Not all vehicles within the above breakpoints may be involved. For dealers with involved vehicles, a listing with involved vehicles containing the complete vehicle identification number, customer name, and address information has been prepared and will be provided through the application system listed below. Dealers will not have a report available if they have no involved vehicles currently assigned.
By Bob
GM Specialist
01/11/2022
Q: What is the procedure of the Auxiliary Body Control Module?
A:
You should press on the tabs to release the auxiliary body control module, disconnect the electrical connectors and reprogram the auxiliary body control module.
By Bob
GM Specialist
01/11/2022
Q: What is the procedure of the Body Control Module?
A:
You should remove the BCM cover, disconnect the electrical connectors, press on the tabs to release the body control module, and program the module.
By Bob
GM Specialist
01/11/2022
Q: What modules are included in the body control module?
A:
They are the 2009 Cadillac CTS, Escalade, Escalade ESV, 2009 Chevrolet Suburban, 2009 GMC Yukon, and Yukon XL and Equipped with Rainsense II Wiper Feature.
By Bob
GM Specialist
01/11/2022
Q: What should we know about the Communication Interface Module?
A:
You should push outward on the two tabs to release the communication interface module from the bracket, and disconnect the electrical connectors. When replacing the communication interface module be sure to transfer Bluetooth Antenna, if equipped, and reprogram the communication interface module after replacement.
By Bob
GM Specialist
29/10/2022
Q: What are the preliminary procedures for Communication Interface Module Replacement (Except Cadillac)?
A:
You should remove the instrument Panel Accessory Trim Plate, the HVAC Control Module, and the radio.
By Bob
GM Specialist
29/10/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How do I remove the Brake Pedal Position Sensor?
A:
You should remove the driver knee bolster, remove the fuse block cover, disconnect the brake pedal position sensor electrical connector, remove the brake pedal position sensor bolts and remove the brake pedal position sensor from the vehicle.