< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Suburban 1500
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Suburban 1500 Hose Asm, Auxiliary A/C Evaporator & Auxiliary Heater
PartNumber: 19257317
Product Specifications- Notes: Auxiliary; Auxillary Evaporator Hose; Escalade Esv;Auxillary Evaporator Hose; Yukon Xl, Suburban
- Other Names: AC Hose, Rear AC Line
- Item Dimensions: 106.4 x 14.5 x 29.4 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15827282
- Part Description: 2009 Chevrolet Suburban 1500 Hose Asm, Auxiliary A/C Evaporator & Auxiliary Heater
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$301.25 MSRP:$759.47You Save: $458.22 (61%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Front AC Hose
PartNumber: 22876350
Product Specifications- Notes: 1/2 Ton; Condenser Hose; Escalade Esv;Condenser Hose; Yukon Xl, Suburban; 5.3l, 6.0l, 6.2l
- Item Dimensions: 24.5 x 15.7 x 4.0 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25975795, 25975794, 15816513, 22759499
- Part Description: 2009 Chevrolet Suburban 1500 Front AC Hose
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$88.92 MSRP:$167.79You Save: $78.87 (48%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Rear AC Hose
PartNumber: 22876357
Product Specifications- Other Names: AC Hose, Rear AC Hose
- Item Dimensions: 28.6 x 4.9 x 2.3 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432439
- Part Description: 2009 Chevrolet Suburban 1500 Rear AC Hose
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$62.50 MSRP:$117.94You Save: $55.44 (48%)OEM (Genuine) 2009 Chevrolet Suburban 1500 Rear AC Hose
PartNumber: 22876355
Product Specifications- Other Names: AC Hose, Rear AC Hose
- Item Dimensions: 17.4 x 17.0 x 6.4 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19432440
- Part Description: 2009 Chevrolet Suburban 1500 Rear AC Hose
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$98.78 MSRP:$186.40You Save: $87.62 (48%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Evaporator Tube
PartNumber: 19418540
Product Specifications- Notes: W/Rear AC, 1/2 Ton
- Other Names: AC Hose, AC Line, Evaporator Tube
- Item Dimensions: 48.9 x 15.0 x 12.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22876353, 25896467, 22848540, 15789821
- Part Description: 2009 Chevrolet Suburban 1500 Evaporator Tube
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$88.02 MSRP:$166.10You Save: $78.08 (48%)
OEM (Genuine) 2009 Chevrolet Suburban 1500 Evaporator Tube
PartNumber: 19418541
Product Specifications- Notes: W/O Rear AC
- Other Names: AC Hose, AC Line, Evaporator Tube
- Fitment Type: Direct Replacement
- Replaces: 22848533, 22876354, 15784599
- Part Description: 2009 Chevrolet Suburban 1500 Evaporator Tube
Vehicle Fitment- 2009 Chevrolet Suburban 1500 | LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$87.73 MSRP:$165.53You Save: $77.80 (48%)
FAQ for A/C Hose Repair
Q: How do I remove the Discharge Hose (LY2, LMF, L76, and L92)?
A:
You should recover the refrigerant, remove the discharge hose mounting bolt from the A/C compressor, remove the discharge hose from the A/C compressor, remove the upper radiator baffle, remove the discharge hose nut from the condenser, remove the discharge hose from the condenser, disconnect the electrical connector from the A/C recirculation switch, remove the discharge hose from the vehicle, discard all of the used sealing washers and cap the system openings.
By Bob
GM Specialist
28/10/2022Q: What should be cautioned about in installing the Auxiliary Air Conditioning Evaporator Tube?
A:
The replacement A/C and heater pipes are shipped in two sections and spliced together upon installation. And you should install the auxiliary A/C evaporator tubes to the condenser tube and the accumulator using the nuts and recharge the refrigerant to the system.
By Bob
GM Specialist
28/10/2022Q: How do I install the Discharge Hose (LY2, LMF, L76, and L92)?
A:
You should install the discharge hose to the vehicle, install the discharge hose to the condenser using new sealing washers, install the discharge hose nut to the condenser, install the upper air baffle, connect the electrical connector to the A/C recirculation switch, install the discharge hose to the A/C compressor using new sealing washers, install the discharge hose mounting bolt, evacuate and recharge the A/C system and leak test the fittings of the component using the J 39400-A.
By Bob
GM Specialist
28/10/2022Q: What should be cautioned in Evaporator Tube replacement (Non-HP2)?
A:
You should remove the evaporator tube nut from the evaporator, disconnect the evaporator tube from the evaporator, remove the evaporator tube nut from the auxiliary A/C tube, if equipped and disconnect the evaporator tube from the auxiliary A/C tube if equipped. Then you should install the upper radiator air baffle and deflector, evacuate and recharge the system, and leak test the fittings of the components using the J 39400-A.
By Bob
GM Specialist
28/10/2022Q: What tools are required to repair Auxiliary Heater and Air Conditioning Pipe?
A:
J41425 A/C Line Repair Kit.
By Bob
GM Specialist
28/10/2022Q: How to repair the Straight Line?
A:
You should recover the refrigerant, if repairing the A/C lines and drain the coolant, if repairing the heater lines, raise and support the vehicle, locate the area that requires repair, obtain a length of replacement line to make the repair, use a tubing cutter in order to cut and remove the section of damaged line, use a tubing cutter in order to cut the replacement line to length, use the cleaning pad from the J 41425 in order to clean any burrs or grease from the line ends, be sure to clean at least 19 mm (0.75 in) from the line ends, use the LOK prep sealant in order to prep the line ends, apply one drop of the J 41425-3 sealing compound to the outside of each end of the line, insert the line ends into the LOK fitting, rotate the LOK fitting one complete turn in order to evenly distribute the sealing compound around the lines, install the correct LOK fitting jaws into the J 41425-1 tool, install the J 41425-1 tool over the LOK connector and verify that the LOK connector ends are positioned in the counter bores of the jaws.
By Bob
GM Specialist
28/10/2022Q: What should be noticed in removing the Auxiliary Air Conditioning Evaporator Tube?
A:
You should remove the retaining nut and the auxiliary A/C evaporator tubes from the auxiliary HVAC module, remove the heater/A/C tubes retaining nut from the stud at the frame, and remove the auxiliary A/C evaporator tubes from the clamps.
By Bob
GM Specialist
28/10/2022Q: What tools are required to replace the Evaporator Tube (Non-HP2)?
A:
You need J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
28/10/2022See more FAQs (3)