FAQ for Vehicle Speed Sensors Repair
Q: What should be done before servicing the Vehicle Speed Sensor?
A:
You should raise and support the vehicle and then remove the transfer case shield.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the vehicle speed sensor?
A:
The recommended torque is 17 N.m (13 lb-ft).
By BobGM Specialist
01/11/2022 Q: How to install the Vehicle Speed Sensor?
A:
You should coat a new O-ring seal with a thin film of Synchro-mesh transmission fluid, install the VSS and O-ring seal and then connect the VSS electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Vehicle Speed Sensor Bolts?
A:
The recommended torque is 12 N.m (111 lb in).
By BobGM Specialist
01/11/2022 Q: How to remove the Vehicle Speed Sensor?
A:
You should raise and suitably support the vehicle, disconnect the vehicle speed sensor (VSS) electrical connector and then remove the VSS and O-ring seal.
By BobGM Specialist
01/11/2022 Q: How to remove the Speed Sensor?
A:
You should be sure the vehicle ignition is turned off, disconnect the external wiring harness from the speed sensor, remove the bolt from the speed sensor and carefully remove the speed sensor.
By BobGM Specialist
01/11/2022 Q: How to install the Speed Sensor?
A:
You should install a new O-ring on the speed sensor, install the new speed sensor into the speed sensor bore, install the speed sensor bolt, and reconnect the external wiring harness to the speed sensor.
By BobGM Specialist
01/11/2022 See more FAQs (2)