< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 3500 HD
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Sensor Asm-Steering Column Tilt Wheel Position
PartNumber: 15886733
Product Specifications- Other Names: Position Sensor
- Item Dimensions: 4.3 x 3.2 x 2.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25833069, 15112675
- Part Description: 2009 Chevrolet Silverado 3500 HD Sensor Asm-Steering Column Tilt Wheel Position
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Steering Angle Sensor Repair
Q: How to remove the Steering Wheel Position Sensor?
A:
You should remove the connector from the sensor, the sensor from the adapter and bearing assembly, the connector from the sensor, the sensor from the adapter and bearing assembly, the connector from the sensor, the sensor from the adapter and bearing assembly, the connector from the sensor, the sensor clip from the sensor, the sensor clip from the sensor, the connector from the sensor, the sensor from the adapter and bearing assembly, the connector from the sensor and the sensor from the adapter and bearing assembly.
By Bob
GM Specialist
01/11/2022Q: How many screws attach to the steering column bracket?
A:
There are 3 screws attaching the steering column bracket.
By Bob
GM Specialist
01/11/2022Q: What should be noted for the Steering Wheel Position Sensor?
A:
You should install a pin into the sensor before removal or the sensor will lose its centered position and must be discarded. A new steering wheel position sensor will come with a pin installed in the sensor. During installation, the steering wheel position sensor must be set with approximately a 3 mm gap between it and the bearing adapter.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the steering column bracket screws?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022