< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 3500 HD
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Seat Back Heater
PartNumber: 20792749
Product Specifications- Notes: Bucket Seat, Passenger Seat, W/Power Lumbar, Seat Back; Bucket Seat, Driver Seat, W/Power Lumbar, Seat Back; Silverado, Sierra; Seat Back
- Item Dimensions: 11.8 x 4.9 x 5.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25911156, 15232560
- Part Description: 2009 Chevrolet Silverado 3500 HD Seat Back Heater
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$66.32 MSRP:$100.04You Save: $33.72 (34%)
OEM (Genuine) 2009 Chevrolet Silverado 3500 HD Heater Asm-Driver Seat Cushion
PartNumber: 20792748
Product Specifications- Notes: Bucket Seat, Passenger Seat, W/Power Lumbar, Seat Bottom; Bucket Seat, Driver Seat, W/Power Lumbar, Seat Bottom; Silverado, Sierra; Seat Cushion
- Other Names: Element, Heater Element, Seat Cushion Heater
- Item Dimensions: 12.8 x 12.5 x 3.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15232559
- Part Description: 2009 Chevrolet Silverado 3500 HD Heater Asm-Driver Seat Cushion
Vehicle Fitment- 2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$71.15 MSRP:$107.34You Save: $36.19 (34%)
FAQ for Seat Heater Pad Repair
Q: How to perform the visual/physical inspection?
A:
You should inspect for aftermarket devices that could affect the operation of the system and then inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.
By Bob
GM Specialist
01/11/2022Q: How many guides attach to the Front Seat Head Restraint?
A:
There are 2 guides attaching the Front Seat Head Restraint.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Front Seat Head Restraint Assembly?
A:
You should depress the button on the inboard head restraint guide to raise the head restraint to the full up position and then insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seat cushion blower nuts?
A:
The recommended torque is 3 N.m (25 lb in).
By Bob
GM Specialist
01/11/2022Q: How many rivets attach to the Front Seat Back Blower?
A:
There are 2 rivets attaching the Front Seat Back Blower.
By Bob
GM Specialist
01/11/2022Q: How to service the Seat Switch?
A:
You should disconnect the X4 harness connector at the appropriate door lock/window switch, test for infinite resistance between the low reference circuit terminal 4 and the signal terminals listed below with the switch in the open position, test for less than 2 O, connect a 3 A fused jumper wire between the low reference circuit terminal 4 and ground and then connect a test lamp between B+ and each control terminal listed below.
By Bob
GM Specialist
01/11/2022Q: How many nuts attach to the Seat Cushion Blower?
A:
There are 3 nuts attached to the Seat Cushion Blower.
By Bob
GM Specialist
01/11/2022Q: How to service the Driver or Passenger Seat Cushion Heater?
A:
You should disengage the j-channel retainers from the seat cushion frame and then remove the seat cushion cover and pad from the seat cushion frame as an assembly.
By Bob
GM Specialist
01/11/2022Q: What should be noted for the Heated Seat Switch Indicators?
A:
You should disconnect the X4 harness connector at the appropriate door lock/window switch, connect a 3 A fused jumper wire between the low reference circuit terminal 4 and ground, connect a test lamp between B+ and each control circuit listed below, and then replace the door lock/window switch.
By Bob
GM Specialist
01/11/2022Q: How to verify the Circuit/System?
A:
If both, the driver and passenger heated and cooled seats are inoperative. You observe the scan tool Driver Door Switch parameters listed below while pressing and releasing the appropriate switch. You should observe the scan tool Passenger Door Switch parameters listed below while pressing and releasing the appropriate switch. If all heated and cooled seat functions operate normally, the heated/cooled seat switch indicators do not illuminate or are always on.
By Bob
GM Specialist
01/11/2022See more FAQs (6)