FAQ for Seat Cushion Pad Repair
Q: What should be noted for the Front Seat Adjuster's Inner Finish Cover?
A:
You should disengage the bezel around the seat belt buckle, squeeze the tabs in the rear of the cover together to disengage the outer trim cover from the rear trim cover, and then pull outward to release the retainers from the seat.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Seat Adjuster Outer Finish Cover screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: How many covers attach to the Front Seat Armrest Hinge Finish?
A:
There are 2 covers attaching the Front Seat Armrest Hinge Finish.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the Front Center Seat Storage Compartment bolts?
A:
The recommended torque is 9 N.m (80 lb in).
By BobGM Specialist
01/11/2022 Q: What needs to be done before servicing the Rear Seat Cushion Cover?
A:
You should disconnect the j-channel from the seat cushion frame, remove the seat cushion cover and pad as an assembly from the frame and then remove the seat cushion cover from the pad.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Rear Seat Cushion Frame?
A:
You should remove the rear bench seat, separate the rear split bench seat, remove the rear seat back recliner cover, remove the rear seat cushion side outer cover and then remove the rear seat cushion cover and pad.
By BobGM Specialist
01/11/2022 Q: How to service the Front Seat Cushion Cover and Pad?
A:
You should disengage the j-channel retainers from the seat cushion frame and then remove the seat cushion cover and pad from the seat cushion frame as an assembly.
By BobGM Specialist
01/11/2022 Q: How to service the Driver or Passenger Seat Back Cushion Cover and Pad?
A:
You should disengage the j-channel retainers from the seat back cushion frame, remove the rear seat recliner to seat cushion frame bolt on each side and tilt the seat back forward to make it easier to remove and install the cover, disconnect the blower from the seat back cushion pad, remove the air duct, disconnect the electrical connectors that attach to the seat back cushion, remove the seat back cushion cover and pad and then pull the cover away from the pad to disengage the retainers.
By BobGM Specialist
01/11/2022 Q: How many covers attach to the Front Seat Armrest Hinge Finish?
A:
There are 2 covers attaching the Front Seat Armrest Hinge Finish.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Driver or Passenger Seat Back Cushion Frame?
A:
You should remove the front seat, the front seat back cushion cover and pad, and the front seat cushion cover and pad.
By BobGM Specialist
01/11/2022 See more FAQs (31)