FAQ for Power Seat Switch Repair
Q: What is the recommended torque for the Inflatable Restraint Seat Position Sensor screws?
A:
The recommended torque is 3 N.m (25 lb in).
By BobGM Specialist
01/11/2022 Q: What should be noted for the Front Seat Adjuster and Recliner Switch?
A:
You should use a small flat-bladed tool to disengage the lumbar control switch from the outer finish cover.
By BobGM Specialist
01/11/2022 Q: How many bolts attach to the Rear Seat Back Cushion Frame?
A:
There are 4 bolts attached to the Rear Seat Back Cushion Frame.
By BobGM Specialist
01/11/2022 Q: How many screws attach to the Front Side Door Trim Panel?
A:
There are 2 screws attaching the Front Side Door Trim Panel.
By BobGM Specialist
01/11/2022 Q: What should be noted for the Front Seat Adjuster Switch Knob?
A:
You should pull outward from the seat to remove it. If too tight, a flat-bladed tool may be used to help disengage the knob from the switch.
By BobGM Specialist
01/11/2022 Q: How many screws attach to the Inflatable Restraint Seat Position Sensor?
A:
There are 2 screws attaching the Inflatable Restraint Seat Position Sensor.
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the Rear Seat Latch?
A:
You should remove the rear seat, remove the rear seat back cover and pad, remove the rear seat head restraint, remove the rear seat head restraint guides, remove the rear seat back cover and pad and then remove the rear seat cushion cover and pad.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the front side door trim panel screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
01/11/2022 Q: What should be done before servicing the inflatable restraint seat position sensor?
A:
You should disable the supplemental inflatable restraint (SIR) system and then remove the driver's seat.
By BobGM Specialist
01/11/2022 Q: What should be noted for the Lumbar Control Switch?
A:
You should use a small flat-bladed tool to disengage the lumbar control switch from the outer finish cover.
By BobGM Specialist
01/11/2022 See more FAQs (6)