FAQ for Pillar Panels Repair
Q: What is the recommended torque for the Windshield Side Garnish Molding screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the Seat Belt Assembly Anchor bolts?
A:
The recommended torque is 70 N.m (52 lb-ft).
By BobGM Specialist
02/11/2022 Q: What should be noted for the Center Pillar Upper Garnish Molding Assembly?
A:
You should remove the seat belt D-ring from the adjuster assembly, pull the garnish molding toward the inside of the vehicle to disengage the retainers, and then align the 4-way locator to the center pillar before engaging the retainers.
By BobGM Specialist
02/11/2022 Q: What should be done before servicing the Center Pillar Lower Garnish Molding?
A:
You should remove the front door sill plate and rear door sill plate.
By BobGM Specialist
02/11/2022 Q: What should be done before servicing the Windshield Pillar Garnish Molding?
A:
You should disable the roof rail supplemental inflatable restraint (SIR) system and then remove the front assist handle.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the Center Pillar Upper Garnish Molding screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the Seat Belt Assembly Anchor nuts?
A:
The recommended torque is 70 N.m (52 lb-ft).
By BobGM Specialist
02/11/2022 Q: How to service the Windshield Pillar Garnish Molding?
A:
Tabs must be installed prior to retainers and you should disconnect electrical connectors.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the Body Lock Pillar Garnish Molding screws?
A:
The recommended torque is 2 N.m (18 lb in).
By BobGM Specialist
02/11/2022 Q: What should be done before servicing the Body Lock Pillar Trim?
A:
You should disable the supplemental inflatable restraint (SIR) system, remove the rear side door sill plate and then remove the rear window lower molding.
By BobGM Specialist
02/11/2022 See more FAQs (30)