Part Description: 2009 Chevrolet Silverado 3500 HD Blue™ Rear Parking Brake Shoes
Vehicle Fitment
2009 Chevrolet Silverado 3500 HD | All Trims | All Engines
FAQ for Parking Brake Shoe Repair
Q: How to service the Parking Brake Shoe?
A:
You should remove and install the park brake shoe, apply a thin coat of high-temperature silicone brake lubricant to the contact areas of the brake shoe and the backing plate and then adjust the park brake.
By Bob
GM Specialist
01/11/2022
Q: How to service the Park Brake Shoe?
A:
You should use denatured alcohol to clean brake dust or grease from the park brake shoes and hardware, note the location of the park shoes for installation, apply a small amount of high-temperature silicone grease to the brake shoe and backing plate contact points and then adjust the park brake.
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Parking Brake Shoe?
A:
You should raise and support the vehicle, remove the brake rotor and then disconnect the park brake cable from the actuator.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque for the EBCM bolts?
A:
The recommended torque is 3 N.m (27 lb in).
Q: How to install the Rear Wheel Speed Sensor Ring?
A:
You should install the wheel speed sensor ring, the axle shaft bearing, the axle shaft seal, the axle shaft, the rear axle housing cover, the rear wheel speed sensor, and the tire and wheel assembly.