Part Description: 2009 Chevrolet Silverado 3500 HD Handle Asm-Rear Side Door Inside *Titanium
More Info
Vehicle Fitment
2009 Chevrolet Silverado 3500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Interior Door Handle Repair
Q: What is the recommended torque for the roof rail rear assist handle screws?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022
Q: What should be noted for the Front Side Door Inside Handle Assembly?
A:
You should disconnect the electrical connector and transfer the heated seat switch to the new handle.
By Bob
GM Specialist
01/11/2022
Q: How many bolts attach to the Front Side Door Inside Handle?
A:
There are 2 bolts attaching the Front Side Door Inside Handle.
By Bob
GM Specialist
01/11/2022
Q: How many screws attach to the Assist Handle?
A:
There are 2 screws attached to the Assist Handle.
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Rear Side Door Inside Handle?
A:
You should remove the door window control switch and then remove the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the Assist Handle screws?
A:
The recommended torque is 1.2 N.m (19 lb in).
By Bob
GM Specialist
01/11/2022
Q: How many covers attach to the Roof Rail Rear Assist Handle?
A:
There are 2 covers attaching the Roof Rail Rear Assist Handle.
By Bob
GM Specialist
01/11/2022
Q: How many bolts attach to the Rear Side Door Inside Handle?
A:
There are 2 bolts attaching the Rear Side Door Inside Handle.
By Bob
GM Specialist
01/11/2022
Q: How many screws attach to the Roof Rail Rear Assist Handle?
A:
There are 2 screws attaching the Roof Rail Rear Assist Handle.
By Bob
GM Specialist
01/11/2022
Q: What should be done before servicing the Center Pillar Assist Handle?
A:
You should disable the roof rail supplemental inflatable restraint (SIR) system and then remove the center pillar upper garnish molding assembly.
By Bob
GM Specialist
01/11/2022
See more FAQs (9)
FAQ for Other Repair Info
Q: How many upper bolts attach to the Rear Side Door Hinge?
A:
There are 2 upper bolts attaching the Rear Side Door Hinge.
Q: What should be done before servicing the Door Lock Cylinder?
A:
You should place the door window as needed for service, remove the door trim panel, remove the water deflector and then remove the outside door handle.
Q: How to service the Door Lock Switch?
A:
You should use a small flat-bladed tool to aid in the removal of the switch from the bezel.