Part Description: 2009 Chevrolet Silverado 3500 HD OE Solutions Exhaust Gas Temperature Egt Sensor
More Info
Vehicle Fitment
2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.6L
FAQ for Exhaust Gas Temperature Sensor Repair
Q: How to install the Exhaust Temperature Sensor?
A:
You should install the exhaust temperature sensor, connect the exhaust temperature sensor electrical connector to the chassis wiring harness electrical connector and then lower the vehicle.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Exhaust Temperature Sensor?
A:
You should raise and support the vehicle, disconnect the exhaust temperature sensor electrical connector from the chassis wiring harness electrical connector and then remove the exhaust temperature sensor.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque for the exhaust temperature sensor?
A:
The recommended torque is 45 N.m (33 lb-ft).
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to remove the Exhaust Gas Recirculation Cooling Pipe?
A:
You should remove the upper EGR Cooler pipe nut, the lower EGR cooler pipe bolt, the EGR cooler pipe bolt and bracket, and the EGR cooler pipe from the engine.
Q: How to install the Exhaust Gas Recirculation Valve?
A:
You should install the EGR Valve bolts, new EGR valve gaskets, and the EGR valve cooler.
Q: What is the recommended torque for the fuel filter bracket bolts?