Notes: Some competitive parts have a detachable ring that can remain in the air filter housing. Make sure this detachable ring is removed from the housing before installing the new part
Class: HA
Cubic Feet Per Minute Rating: 792 CFM
Duty Type: HD
Filter End Material: Plastic
Height: 6.275"
Inner Diameter Top: Closed
Inside Diameter Top: Closed
Media Type: Cellulose
Outer Diameter: 8.917"
Outer Diameter Bottom: 8.917"
Outer Diameter Top: 8.917"
UPC: 765809491847
Part Description: 2009 Chevrolet Silverado 3500 HD Corrugated Style Air Filter
More Info
Vehicle Fitment
2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.6L
Part Description: 2009 Chevrolet Silverado 3500 HD Panel Air Filter
More Info
Vehicle Fitment
2009 Chevrolet Silverado 3500 HD | All Trims | 8 Cyl 6.0L
FAQ for Air Filter Repair
Q: How to remove the Air Cleaner Element?
A:
You should remove the air cleaner housing door and the air filter element.
By Bob
GM Specialist
01/11/2022
Q: How to install the Air Cleaner Element?
A:
You should stand facing the front fender on the passenger side of the vehicle, insert the element into the housing, press both downward and inboard until the outboard end of the element clicks into place inboard of the locating tab and then install the air cleaner housing door and tighten the screw.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the air cleaner housing door screw?
A:
The recommended torque is 4 N.m (35 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the Manifold Absolute Pressure (MAP) Sensor?
A:
You should install the MAP Sensor and bracket and the MAP sensor bolt.
Q: How to install the Intake Manifold Tube?
A:
You should install new O-ring seals onto the tube, the Intake Manifold tube, the air inlet tube, new gaskets, the air inlet tube nuts and bolt, and the engine harness clip to the air inlet tube.
Q: What is the recommended torque for the MAF/IAT sensor TORX(R) screws?