Part Description: 2009 Chevrolet Silverado 2500 HD Wiper Arm
More Info
Vehicle Fitment
2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
FAQ for Windshield Wiper Arms Repair
Q: What tools should you use to remove the finish cap?
A:
You should use a small flat-bladed tool to remove the finish cap.
By Bob
GM Specialist
01/11/2022
Q: What should you do before replacing the Windshield Wiper Arm (LD)?
A:
You should open the hood to access and remove the wiper arm assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when you tighten the windshield washer arm nut?
A:
You can tighten the nut to 30 Nm (22 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you clean the wiper blade element?
A:
You can lift the Wiper Blade assemblies off of the windshield glass, clean the wiper blade element, rinse the wiper blade assemblies with water and place the wiper blade assemblies back onto the windshield glass.
Q: What should you remove before replacing the Windshield Washer Solvent Heater?
A:
You should remove the front fender and rear upper brace to access the washer solvent heater assembly.
Q: What tools can be used to ease the installation of the new washer pump into the new grommet?
A:
You can use full-strength windshield washer solvent for a lubricant on the pump spout.