< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Power Steering Pumps
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Reservoir Kit, P/S Fluid
PartNumber: 19207054
Product Specifications- Notes: 3/4 & 1 Ton, 6.0 Liter
- Other Names: Reservoir
- Item Dimensions: 10.0 x 8.9 x 7.0 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26045591
- Part Description: 2009 Chevrolet Silverado 2500 HD Reservoir Kit, P/S Fluid
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
$146.15 MSRP:$254.38You Save: $108.23 (43%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Reservoir Kit, P/S Fluid
PartNumber: 19207051
Product Specifications- Notes: 3/4 & 1 Ton, 6.6 Liter Diesel
- Other Names: Reservoir
- Item Dimensions: 9.8 x 8.7 x 7.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15857161, 26078885
- Part Description: 2009 Chevrolet Silverado 2500 HD Reservoir Kit, P/S Fluid
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
FAQ for Power Steering Reservoir Repair
Q: What is the removal procedure for the Power Steering Fluid Reservoir (Off Vehicle)?
A:
The procedure is to remove the power steering pump assembly, the power steering fluid reservoir studs, the power steering pump fitting, the power steering pump fitting seal, the power steering pump flow control valve, and the power steering pump flow control valve spring, separate the power steering fluid reservoir and the power steering pump, remove the power steering pump seals, remove and clean the power steering fluid reservoir magnet and inspect the welch plug in the power steering pump.
By Bob
GM Specialist
01/11/2022Q: How do you install the Power Steering Fluid Reservoir (Off Vehicle)?
A:
You can clean and install and install the power steering fluid reservoir magnet, install the power steering pump seals, connect the power steering fluid reservoir and the power steering pump, install the power steering pump flow control valve spring, and the power steering pump flow control valve, install the power steering pump fitting seal to the power steering pump assembly, install the power steering pump fitting, install the power steering fluid reservoir studs and install the power steering pump assembly.
By Bob
GM Specialist
01/11/2022Q: How do you bleed the power steering system?
A:
You can fill the pump reservoir with fluid to the minimum system level, FULL COLD level, or middle of hash mark on the cap stick fluid level indicator, fully charge the hydro-boost accumulator, raise the vehicle, turn the steering wheel from stop to stop 12 times, verify power steering fluid level per operating specification, start the engine and verify the fluid level.
By Bob
GM Specialist
01/11/2022Q: What must you maintain throughout the bleeding procedure for the Power Steering System?
A:
You must maintain the power steering fluid level.
By Bob
GM Specialist
01/11/2022