< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Brands
- Prices
Dorman® OE Solutions Diesel Oil Cooler for 2009 Chevrolet Silverado 2500 HD
PartNumber: 918-400Product Specifications- Color or Finish: Silver
- Cooler Inlet Size: 0.72"
- Cooler Outlet Size: 0.72"
- Cooling Row Quantity: 11
- Core Tube Width: 0.155"
- Depth: 2.35"
- Diameter (in): 0.72"
- Finish: Brushed Metal
- Height: 3.281"
- Inlet Fitting Type: Female
- Installation Hardware Included: Yes
- Item Grade: Standard Replacement
- Material: Aluminum
- OE Part Number: 12649227, 19210615
- Outlet Fitting Type: Female
- Thickness (in): 3.096"
- UPC: 019495387121
- Width (in): 3.096"
- Part Description: 2009 Chevrolet Silverado 2500 HD OE Solutions Diesel Oil Cooler
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.6L
$248.31
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Cooler Asm, Engine Oil
PartNumber: 19210615
Product Specifications- Notes: 6.6 Liter Diesel
- Other Names: Oil Cooler
- Item Dimensions: 10.8 x 10.4 x 8.2 inches
- Item Weight: 13.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 97329038, 97351829, 97262115
- Part Description: 2009 Chevrolet Silverado 2500 HD Cooler Asm, Engine Oil
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.6 L DIESEL
Cardone Reman® Remanufactured Oil Cooler for 2009 Chevrolet Silverado 2500 HD
PartNumber: 2P-101Product Specifications- Color: Silver
- Cooler Inlet OD Size: 0.725"
- Cooler Outlet OD Size: 0.725"
- Cooling Row Quantity: 11
- E-Waste: No
- Inlet Attachment Type: Gasket
- Installation Hardware Included: Yes
- Material: Aluminum
- Outlet Attachment Type: Gasket
- Package Contents: Engine Oil Cooler, Gaskets, O-Rings, Instruction Sheet
- Product Condition: Remanufactured
- UPC: 884548143500
- Part Description: 2009 Chevrolet Silverado 2500 HD Remanufactured Oil Cooler
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.6L
FAQ for Engine Oil Cooler Repair
Q: What is the removal procedure for the Engine Oil Cooler Hose/Pipe Quick-Connect Fitting?
A:
The procedure is to remove the plastic caps from the quick connect fittings, install the DT-47731 onto the engine oil cooler (EOC) pipe, slide the DT-47731 toward the EOC pipe fitting, connect the DT-47731 onto the EOC pipe fitting, rotate the DT-47731, pull back on the EOC pipe and remove the DT-47731 or the J 28585 from the EOC pipe.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the differential carrier right-side nuts?
A:
You can tighten the bolt to 100 Nm (74 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the oil cooler hose bracket bolt?
A:
You can tighten the bolt to 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the oil cooler hose adapter bolts?
A:
You can tighten the bolts to 12 Nm (106 lb in).
By Bob
GM Specialist
01/11/2022Q: What should you remove before installing the Engine Oil Cooler Connector?
A:
You should remove the plastic caps from the quick-connect fittings by pulling the caps back along the pipe before installation.
By Bob
GM Specialist
01/11/2022Q: How do you install the Engine Oil Cooler Hose/Pipe Quick-Connect Fitting?
A:
You can install the EOC pipe into the EOC pipe fitting and give the cooler pipe a gentle pull.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Engine Oil Cooler Connector?
A:
You should drain the cooling system and remove the engine oil cooler pipe from the oil cooler fittings on the radiator.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the engine oil cooler hose/pipe?
A:
The first step is to disconnect the engine oil cooler quick-connect fittings.
By Bob
GM Specialist
01/11/2022Q: How do you replace the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You can disengage the plastic caps from the quick connect fittings, pull on one of the open ends of the retaining ring, rotate the retaining ring around the quick connector, remove the engine oil cooler line, clean all of the components in a suitable solvent, dry them with compressed air and inspect the fittings, the connectors, the cooler lines and the cooler for damage, distortion or restriction.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Engine Oil Cooler Pipe/Hose Quick Connect Fitting?
A:
You can install a new retaining ring, hook one of the open ends of the retaining ring in one of the slots in the quick connector, rotate the retaining ring around the connector, install the engine oil cooler line into the quick connector fitting, snap the plastic cap onto the quick connect fitting and inspect and fill the engine oil to the proper level.
By Bob
GM Specialist
01/11/2022See more FAQs (5)