< Back ×
2009 Chevrolet Silverado 2500 HD Driveshaft
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
$511.72 MSRP:$846.94You Save: $335.22 (40%)Product Specifications- Notes: Silverado, Sierra; 8.50, 8.625
- Other Names: Axle Shaft
- Item Dimensions: 7.5 x 7.2 x 36.0 inches
- Item Weight: 28.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15286380
- Part Description: 2009 Chevrolet Silverado 2500 HD Axle Shafts
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$300.24 MSRP:$522.56You Save: $222.32 (43%)Product Specifications- Notes: Silverado, Sierra; 9.50
- Other Names: Axle, Axle Shaft
- Item Dimensions: 7.3 x 7.5 x 36.3 inches
- Item Weight: 25.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15812663
- Part Description: 2009 Chevrolet Silverado 2500 HD Rear Axle Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$213.29 MSRP:$353.04You Save: $139.75 (40%)Product Specifications- Notes: Silverado, Sierra; 2500, 3500 Series
- Other Names: Inner Shaft, Pinion Shaft, Shaft
- Item Dimensions: 8.8 x 3.9 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15521907
- Part Description: 2009 Chevrolet Silverado 2500 HD Inner Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$351.70 MSRP:$573.25You Save: $221.55 (39%)Product Specifications- Other Names: Axle Assembly, Axle Shaft Assembly
- Item Dimensions: 27.8 x 6.9 x 7.5 inches
- Item Weight: 28.10 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85775028
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Wheel Drive Shaft Assembly
$356.09 MSRP:$589.37You Save: $233.28 (40%)Product Specifications- Notes: 4WD, 3/4 & 1 Ton; Silverado, Sierra; Right; 2500, 3500 Series
- Location: Passenger Side
- Other Names: Axle Shaft, Inner Shaft, Output Shaft
- Item Dimensions: 21.8 x 7.7 x 7.5 inches
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26058829
- Part Description: 2009 Chevrolet Silverado 2500 HD Inner Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$304.38 MSRP:$612.46You Save: $308.08 (51%)Product Specifications- Notes: Silverado, Sierra; 2500, 3500 Series; 6l90 Trans
- Other Names: Drive Shaft
- Fitment Type: Direct Replacement
- Replaces: 15182098, 84060396, 15090195, 15719954
- Part Description: 2009 Chevrolet Silverado 2500 HD Drive Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LS, LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; One Piece; 6l90 Trans; Long Wheelbase;Silverado, Sierra; 2500; One Piece; Allison 1000 Trans; Long Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 90.9 x 6.3 x 6.3 inches
- Item Weight: 25.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Drive Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
Product Specifications- Notes: 3/4 & 1 Ton, 10.50 Ring Gear; Silverado, Sierra; 10.50; Right
- Location: Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 40.8 x 8.4 x 8.5 inches
- Item Weight: 19.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Rear Axle Drive Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 3/4 & 1 Ton
- Other Names: Drive Shaft Assembly
- Item Dimensions: 86.9 x 5.3 x 5.2 inches
- Item Weight: 47.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft Asm-Propeller
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Front Axle Propeller Shaft Assembly
PartNumber: 15182094Product Specifications- Notes: Silverado, Sierra; 2500, 3500 Series; Allison 1000 Trans
- Other Names: Drive Shaft
- Item Dimensions: 40.7 x 3.9 x 4.0 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Axle Propeller Shaft Assembly
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LS, LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: 4WD, 3/4 & 1 Ton
- Location: Driver Side
- Other Names: Axle Shaft, Inner Shaft, Output Shaft
- Item Dimensions: 7.9 x 7.0 x 6.8 inches
- Item Weight: 6.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26059714
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Drive Axle Inner Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
Product Specifications- Notes: Silverado, Sierra; Left; 2500, 3500 Series
- Other Names: Inner Shaft, Output Shaft
- Item Dimensions: 8.1 x 7.6 x 7.6 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Front Drive Axle Inner Shaft
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
Product Specifications- Notes: 3/4 & 1 Ton, 11.50 Ring Gear, W/O Dual Rr Wheels; Silverado, Sierra; 11.50; W/O Dual Rear Wheels; 12000 Lb Towing Capacity
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 38.1 x 4.5 x 4.5 inches
- Item Weight: 17.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Axle Shafts
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: 3/4 & 1 Ton, 10.50 Ring Gear; Silverado, Sierra; 10.50; Left
- Location: Driver Side
- Other Names: Axle Shaft
- Item Dimensions: 35.4 x 4.7 x 4.6 inches
- Item Weight: 16.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft, Rear Axle (LH)
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
- Product Specifications
- Notes: 3/4 & 1 Ton, 11.50 Ring Gear, W/Dual Rr Wheels; Silverado, Sierra; 11.50; W/Dual Rear Wheels;Silverado, Sierra; 11.50; W/O Dual Rear Wheels; 9900 Lb Towing Capacity
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 41.8 x 4.6 x 4.7 inches
- Item Weight: 18.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft-Rear Axle
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 11.50; W/O Limited Slip
- Other Names: Axle Assembly
- Item Dimensions: 79.1 x 22.8 x 15.9 inches
- Item Weight: 127.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Axle Asm-Rear (3.73 Ratio)
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 11.50; W/Limited Slip
- Other Names: Axle Assembly
- Item Dimensions: 79.1 x 22.8 x 15.7 inches
- Item Weight: 127.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Axle Asm-Rear (3.73 Ratio)
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 10.50; 4.10 Ratio; W/O Limited Slip
- Other Names: Axle Assembly
- Item Dimensions: 76.1 x 20.8 x 15.9 inches
- Item Weight: 117.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20875492, 25905607
- Part Description: 2009 Chevrolet Silverado 2500 HD Axle Asm-Rear (4.10 Ratio)
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; 2 Piece; Allison 1000 Trans; Long Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 98.4 x 8.0 x 5.9 inches
- Fitment Type: Direct Replacement
- Replaces: 15271511
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft Asm-Front & Rear Propeller
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; 2 Piece; 6l90 Trans; Short Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 95.7 x 8.1 x 5.9 inches
- Fitment Type: Direct Replacement
- Replaces: 10383403
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft Asm-Front & Rear Propeller
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Front & Rear Propeller Shaft Assembly
PartNumber: 25936891Product Specifications- Notes: Silverado, Sierra; 2500; 2 Piece; 6l90 Trans; Long Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 110.1 x 8.1 x 6.0 inches
- Item Weight: 38.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10383404
- Part Description: 2009 Chevrolet Silverado 2500 HD Front & Rear Propeller Shaft Assembly
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; One Piece; 6l90 Trans; Short Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 78.0 x 4.6 x 4.5 inches
- Item Weight: 31.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Propeller Shaft Assembly
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; 2 Piece; Allison 1000 Trans; Short Wheelbase
- Other Names: Drive Shaft
- Item Dimensions: 85.0 x 7.9 x 6.1 inches
- Item Weight: 47.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15271510
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft Asm-Front & Rear Propeller
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500; One Piece; Allison 1000 Trans; Short Wheelbase
- Other Names: Drive Shaft
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Shaft Asm-Propeller
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 10.50; 3.73 Ratio; W/Limited Slip
- Part Description: 2009 Chevrolet Silverado 2500 HD AXLE, Rear Axle
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 10.50; 3.73 Ratio; W/O Limited Slip
- Other Names: Axle Assembly
- Item Dimensions: 76.0 x 19.6 x 14.3 inches
- Item Weight: 97.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD AXLE, Rear Axle
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
- Product Specifications
- Notes: Silverado, Sierra; 2500 Series; 10.50; 4.10 Ratio; W/Limited Slip
- Item Dimensions: 76.0 x 19.9 x 14.3 inches
- Item Weight: 99.70 Pounds
- Part Description: 2009 Chevrolet Silverado 2500 HD AXLE, Rear Axle
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS
FAQ for Driveshaft Repair
Q: When does a squeaking sound occur?
A:
The squeaking sound occurs when driving the vehicle at various speeds.
By Bob
GM Specialist
29/10/2022Q: What should you review before beginning diagnosis?
A:
You should review the system description and operation to familiarize yourself with the system's function.
By Bob
GM Specialist
29/10/2022Q: How do you install the Front Propeller Shaft?
A:
You can inspect the splines of the transfer case output shaft, install the propeller shaft boot, the propeller shaft boot clamp, the propeller shaft splines, the propeller shaft, the yoke retainers, the bolts, and the boot, crimp both clamps and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: What may a detached balance weight create during acceleration or deceleration?
A:
Adetached balance weight may create a sliding, scraping, or ticking-type noise during acceleration or deceleration.
By Bob
GM Specialist
29/10/2022Q: How do you install the Two-Piece Propeller Shaft?
A:
You can align the reference marks on the transmission or the transfer case, slip yoke, universal bearing cap, and the propeller shaft, install the propeller shaft, align the reference marks on the transmission or the transfer case, output shaft yoke and the propeller shaft, install the propeller shaft, the straps, and the propeller shaft bolts, position the center support bearing on the frame, install the center bearing support nuts, tighten the propeller shaft bolts, install the boot and the new clamps, apply a small amount of clean chassis grease to the slip yoke and the rear propeller shaft, install the rear portion of the propeller, align the reference marks on the rear axle housing, pinion yoke, universal bearing cap, and the rear propeller shaft, install the straps and the bolts, crimp the boot clamps, remove the support and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: How do you install the One-Piece Propeller Shaft?
A:
You can inspect the splines of the slip yoke for a sufficient coating of grease, align the reference marks on the propeller shaft, the slip yoke, the universal bearing caps, the transmission or the transfer case, install the propeller shaft in the transmission or transfer the case, align the reference marks on the propeller shaft, universal bearing cap, pinion flange, and the rear axle housing, install the propeller shaft on the rear axle, install the rear propeller shaft bolts and the strap, remove the support and lower the vehicle.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the One-Piece Propeller Shaft?
A:
The procedure is to raise the vehicle, reference mark the propeller shaft, the universal joint strap, universal bearing cap, the drive pinion yoke, and the rear axle housing, remove the bolts and the universal straps, remove the propeller shaft, the reference mark, the transmission or the transfer case, propeller shaft flip yoke, universal joint bearing cap, and the propeller shaft and remove the propeller shaft from the vehicle.
By Bob
GM Specialist
29/10/2022Q: What action should you take if the side gear hub counterbore in the differential is worn oversize?
A:
You should replace the differential case and/or the side gears.
By Bob
GM Specialist
29/10/2022Q: What action should you take if the pinion flange deflector or the center bearing is rubbing?
A:
You should correct the interference as necessary.
By Bob
GM Specialist
29/10/2022Q: What action should you take if the C/V boot is worn or torn?
A:
You should replace the components as necessary.
By Bob
GM Specialist
29/10/2022See more FAQs (20)