2009 Chevrolet Silverado 2500 HD Differential Bearing

You should use the J 36609 and the J 8092.

You should remove the inner axle shaft and housing assembly, remove the clutch fork assembly components and the inner axle shaft, install the inner axle shaft housing, install the J 29369-1, 8.25-inch axle, or the J 29369-2, 9.25-inch axle, behind the inner axle shaft seal or the inner axle shaft bearing, install the J 2619-01 to the J 29369-1 or the J 29369-2 and remove the inner axle shaft seal and/or the inner axle shaft bearing.

You can tighten the bolts to 79 Nm (58 lb-ft).

The method is to install the original shim to the shaft, install the inner axle housing assembly, install the bolts and measure the shaft end play.

You can install the inner axle bearing and the inner axle seal, install the inner axle shaft, the thrust washer (with tabs), the thrust washer (without tabs), the retaining ring, and the inner axle shaft housing, push on the inner end of the inner axle shaft, move the shaft outboard, install the J 34673 and the J 34672, measure the distance from the edge of the inner axle shaft to the surface of the J 34673, measure the distance from the machined surface of the differential carrier housing to the outer surface of the front drive axle clutch shaft, subtract the measurement, measure the thickness of the J 34673 and subtract the thickness of the J 34673.