< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Joint Kit-Front Axle Propeller Shaft Front Universal
PartNumber: 23104840
Product Specifications- Notes: Silverado, Sierra; 2500, 3500 Series
- Other Names: Universal Joints
- Item Dimensions: 5.8 x 5.3 x 2.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26042371, 12471502, 12479126
- Part Description: 2009 Chevrolet Silverado 2500 HD Joint Kit-Front Axle Propeller Shaft Front Universal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$50.12 MSRP:$87.24You Save: $37.12 (43%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Universal Joints
PartNumber: 19121436
Product Specifications- Notes: Silverado, Sierra; 4WD; 2 Piece; Rear
- Other Names: Universal Joints
- Item Dimensions: 4.1 x 4.2 x 1.6 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19256890, 15898097, 88934794, 88935919, 15515792
- Part Description: 2009 Chevrolet Silverado 2500 HD Universal Joints
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$174.12 MSRP:$288.19You Save: $114.07 (40%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Universal Joints
PartNumber: 88964413
Product Specifications- Notes: Silverado, Sierra; 4WD; 2 Piece; Center
- Other Names: Universal Joints
- Item Dimensions: 4.1 x 4.1 x 1.6 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88982759, 12476310, 12471510, 12478057, 12385742, 12472406, 15599179
- Part Description: 2009 Chevrolet Silverado 2500 HD Universal Joints
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$141.58 MSRP:$234.36You Save: $92.78 (40%)
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Tripot Housing
PartNumber: 15295246
Product Specifications- Notes: Silverado, Sierra; 2500, 3500 Series
- Item Dimensions: 7.3 x 7.4 x 4.8 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26056765, 26062617
- Part Description: 2009 Chevrolet Silverado 2500 HD Tripot Housing
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Joint Asm-Front Wheel Drive Shaft Cv
PartNumber: 26058362
Product Specifications- Notes: 4WD, 3/4 & 1 Ton; Silverado, Sierra; 2500, 3500 Series
- Location: Driver Side; Passenger Side
- Other Names: CV Joint, Inner CV Joint, Outer CV Joint
- Item Dimensions: 8.5 x 6.7 x 7.1 inches
- Item Weight: 12.50 Pounds
- Replaces: 26069243
- Part Description: 2009 Chevrolet Silverado 2500 HD Joint Asm-Front Wheel Drive Shaft Cv
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
FAQ for Cv Joint Repair
Q: What is the recommended torque when you secure the small boot clamp using J 35910 (or equivalent), a breaker bar, and a torque wrench?
A:
You can tighten the small clamp (1) to 136 Nm (100 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What tool can you use to close the boot clamp until the gap measures 2.15 mm (0.085 inches)?
A:
You can use the J-35910-pliers, a breaker bar, and a torque wrench.
By Bob
GM Specialist
01/11/2022Q: What should you clean after removing the inner race from the cage?
A:
You should clean the inner and outer race assemblies, the CV joint cage, and the chrome alloy balls with a cleaning solvent.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Wheel Drive Shaft Outer Joint and Boot?
A:
The first step is to remove the wheel drive shaft.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Wheel Drive Shaft Inner Joint and Boot?
A:
The procedure is to remove the wheel drive shaft, the boot clamp, and the tripot housing, remove any grease from the housing, remove the small boot retaining clamp, remove the retaining ring, the spider assembly, and the boot, and remove any rust in the seal mounting area. Then you can replace the tripot as an assembly if any of the internal components of the tripot assembly are found to be damaged or have excessive wear.
By Bob
GM Specialist
01/11/2022