Part Description: 2009 Chevrolet Silverado 2500 HD Ground Cable
More Info
Vehicle Fitment
2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$12.10MSRP: $22.82
You Save: $10.72 (47%)
FAQ for Body Electrical Ground Strap Repair
Q: What is the removal procedure for the engine ground strap?
A:
The procedure is to remove the engine wiring harness ground bolt, reposition the engine wiring harness ground and ground strap, remove the ground strap nut and remove the ground strap.
By Bob
GM Specialist
01/11/2022
Q: How do you install the engine ground strap?
A:
You can install the ground strap to the stud, install the ground strap nut to the stud at the front of the dash, position the ground strap and engine wiring harness ground and install the engine wiring harness ground bolt.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when you install the engine wiring harness ground bolt?
A:
You can tighten the bolt to 16 Nm (12 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should you remove before replacing the steering wheel horn switch?
A:
You should remove the inflatable restraint steering wheel module.
Q: How do you install the Air Conditioning Cycling Switch (Non-HP2)?
A:
You can install the new O-ring seal to the switch, install the A/C low-pressure switch to the accumulator, connect the electrical connector to the A/C low-pressure switch, and leak test the fittings of the components.