< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
PartNumber: 24232325
Product Specifications- Notes: Silverado, Sierra; 4l60e, 4l65e, 4l70e; 2WD; Booted Lip
- Other Names: Extension Housing Seal
- Item Dimensions: 3.7 x 3.8 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24201470
- Part Description: 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$13.93 MSRP:$23.03You Save: $9.10 (40%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
PartNumber: 24236132
Product Specifications- Notes: Silverado, Sierra; 4l80e, 4l85e; 2WD
- Other Names: Extension Housing Seal
- Item Dimensions: 3.7 x 3.8 x 0.8 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 8675730, 08675730
- Part Description: 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | LT, LTZ, WT | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
$8.53 MSRP:$14.11You Save: $5.58 (40%)OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
PartNumber: 24232324
Product Specifications- Notes: Silverado, Sierra; 4l60e, 4l65e, 4l70e; 2WD; Non-Booted Lip
- Other Names: Extension Housing Seal
- Item Dimensions: 3.4 x 3.4 x 0.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24204540
- Part Description: 2009 Chevrolet Silverado 2500 HD Extension Housing Seal
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$13.01 MSRP:$21.51You Save: $8.50 (40%)
FAQ for Automatic Transmission Extension Housing Seal Repair
Q: How do you install the case extension assembly?
A:
You can install a new case extension O-ring seal, the case extension, the case extension bolts, the transmission mount, and the propeller shaft, remove the drain pan and the transmission jack, lower the vehicle and fill the transmission to the proper level with DEXRON(R) III transmission fluid.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the case extension housing bolts?
A:
You can tighten the bolts to 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you replace the case extension assembly?
A:
You can raise the vehicle, support the transmission, place a drain pan under the vehicle, remove the propeller shaft, the transmission mount, the case extension bolts, and the case extension, and remove and discard the case extension O-ring seal.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the Case Extension Housing have?
A:
The Case Extension Housing has a total of 6 bolts.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Case Extension and Gasket?
A:
You should raise the vehicle, remove the propeller shaft, support the transmission with a suitable jack and remove the transmission mount assembly.
By Bob
GM Specialist
01/11/2022