Part Description: 2009 Chevrolet Silverado 2500 HD Element
More Info
Vehicle Fitment
2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
Notes: Some competitive parts have a detachable ring that can remain in the air filter housing. Make sure this detachable ring is removed from the housing before installing the new part
Class: HA
Cubic Feet Per Minute Rating: 792 CFM
Duty Type: HD
Filter End Material: Plastic
Height: 6.275"
Inner Diameter Top: Closed
Inside Diameter Top: Closed
Media Type: Cellulose
Outer Diameter: 8.917"
Outer Diameter Bottom: 8.917"
Outer Diameter Top: 8.917"
UPC: 765809491847
Part Description: 2009 Chevrolet Silverado 2500 HD Corrugated Style Air Filter
More Info
Vehicle Fitment
2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.6L
Part Description: 2009 Chevrolet Silverado 2500 HD Panel Air Filter
More Info
Vehicle Fitment
2009 Chevrolet Silverado 2500 HD | All Trims | 8 Cyl 6.0L
FAQ for Air Filter Repair
Q: What should you disconnect before replacing the Air Cleaner Element?
A:
You should disconnect the air cleaner outlet duct from the air cleaner assembly.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when you tighten the air cleaner housing cover screws?
A:
You can tighten the screws to 3 Nm (27 lb in).
By Bob
GM Specialist
01/11/2022
Q: How many screws does the air cleaner housing cover have?
A:
The air cleaner housing cover has a total of 4 screws.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you clean the throttle body?
A:
You can remove the air cleaner outlet duct, inspect the Throttle Body bore and the throttle plate for deposits, clean the throttle body bore and the throttle plate, install the air cleaner outlet duct and perform the Throttle Learn Procedure.
Q: What is the removal procedure for the Manifold Absolute Pressure Sensor?
A:
The procedure is to remove the intake manifold sight shield, disconnect the engine wiring harness electrical connector, remove the MAP Sensor retainer and remove the MAP sensor.
Q: What is the removal procedure for the Upper Intake Manifold Cover?
A:
The procedure is to remove the Intake Manifold, reposition the brake booster vacuum hose clamp at the intake manifold, remove the brake booster vacuum hose, remove the upper intake manifold cover nut and remove the upper intake manifold cover.