2009 Chevrolet Silverado 2500 HD Air Bag Clockspring

You can center the existing inflatable restraint steering wheel module coil, align the inflatable restraint steering wheel module coil with the horn tower, slide the inflatable restraint steering wheel module coil onto the steering shaft, seat the new inflatable restraint steering wheel module coil retaining ring, remove and discard the centering tab, connect any electrical connectors, install the steering column shroud, install the steering wheel and remove anti-rotation pin J 42640.

You must route the wires up against the steering column.

The procedure is to verify the wheels on the vehicle are straight ahead and that anti-rotation pin J 42640 is installed or the ignition and start switch is in the LOCK position, remove the steering wheel and the steering column shroud, disconnect any electrical connectors, remove the inflatable restraint steering wheel module coil retaining ring, remove the inflatable restraint steering wheel module coil and discard the old inflatable restraint steering wheel module coil.

You should hold the SIR coil face-up, rotate the coil hub clockwise, rotate the coil hub counterclockwise, align the SIR coil with the horn tower and slide it onto the steering shaft assembly.

You should verify the wheels on the vehicle are straight ahead, that the block tooth of the steering shaft assembly is in the 12 o'clock position and that the ignition switch is in the LOCK position.