< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Silverado 2500 HD
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
OEM (Genuine) 2009 Chevrolet Silverado 2500 HD Switch Actuator
PartNumber: 26060073
Product Specifications- Notes: 4WD, 3/4 & 1 Ton; Silverado, Sierra
- Other Names: Actuator, Switch, Switch Actuator
- Item Dimensions: 8.3 x 3.2 x 3.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Silverado 2500 HD Switch Actuator
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | Base, High Country, LS, LT, LTZ, WT | 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
$145.97 MSRP:$241.60You Save: $95.63 (40%)
Dorman® OE Solutions 4Wd Actuator for 2009 Chevrolet Silverado 2500 HD
PartNumber: 600-101Product Specifications- Housing Material: Plastic
- OE Part Number: 26060073, 8-26060-073-0
- Package Contents: 4wd Actuator Assembly
- Terminal Quantity: 5
- Terminal Type: Blade
- UPC: 019495058922
- Wiring Harness Included: No
- Part Description: 2009 Chevrolet Silverado 2500 HD OE Solutions 4Wd Actuator
Vehicle Fitment- 2009 Chevrolet Silverado 2500 HD | All Trims | All Engines
$92.33
FAQ for 4Wd Actuator Repair
Q: What is the recommended torque when you tighten the two/four-wheel drive actuator bolts?
A:
You can tighten the bolts to 18 Nm (13 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the two/four-wheel drive actuator position sensor bolts?
A:
You can tighten the bolts to 9 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the actuator?
A:
You can tighten the actuator to 20 Nm (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you replace the Front Drive Axle Actuator?
A:
You can raise the vehicle, remove the engine shield, disconnect the electrical connector from the actuator and remove the actuator.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the two/four-wheel drive actuator have?
A:
The two/four-wheel drive actuator has a total of 3 bolts.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Transfer Case Two/Four Wheel Drive Actuator?
A:
You should raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What tools can be used to remove the seal from the actuator?
A:
You can use J 45278 and J 23907.
By Bob
GM Specialist
01/11/2022Q: What should you do before replacing the Transfer Case Two/Four Wheel Drive Actuator Position Sensor?
A:
You should raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Front Drive Axle Actuator?
A:
You can apply a sealant to the threads of the actuator, install the actuator, connect the electrical connector to the actuator, install the engine shield and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the two/four-wheel drive actuator position sensor have?
A:
The two/four-wheel drive actuator position sensor has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022See more FAQs (5)