Part Description: 2009 Chevrolet Express 2500 Water Pump Assembly
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
FAQ for Water Pump Repair
Q: What is the recommended torque for the bolts at a first pass?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
03/02/2022
Q: What is the recommended torque for the water pump to water pump outlet pipe nuts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Omar
GM Specialist
31/01/2022
Q: What is the recommended torque for the water pump to water pump outlet pipe studs?
A:
The recommended torque is 20 Nm (15 lb-ft).
By Bob
GM Specialist
31/01/2022
Q: What should you know about the gasket in the installation?
A:
All gasket surfaces are to be free of oil or other foreign material during assembly.
By Bob
GM Specialist
26/01/2022
FAQ for Other Repair Info
Q: Can the thermostat be serviceable separately?
A:
No, it cannot be serviceable separately. The water pump inlet and thermostat must be replaced as an assembly.
Q: How do you install the Coolant Recovery Reservoir?
A:
You need to install the coolant recovery reservoir, and the coolant recovery reservoir retaining screws, connect the hose, and add coolant to the reservoir.
Q: How do you install the Engine Coolant Fan Lower Shroud?
A:
You need to install the fan shroud, the fan shroud bolts, the air cleaner assembly, and the coolant recovery reservoir.