Part Description: 2009 Chevrolet Express 2500 TPMS Sensor Valve
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 TPMS Sensor
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | All Trims | All Engines
FAQ for TPMS Sensor Repair
Q: What is the recommended torque for the sensor nut?
A:
The recommended torque is 7 Nm (62 lb in).
By Omar
GM Specialist
01/02/2022
Q: What should you do if any tire sealant is noted upon tire dismounting?
A:
In this situation, you need to remove all residual liquid sealant from the inside of the tire and wheel surfaces.
By Bob
GM Specialist
27/01/2022
FAQ for Other Repair Info
Q: How do you install the Power Mirror Switch?
A:
You need to install the power Mirror Switch, engage the retaining tabs, the electrical connector, and the front door trim plate.
Q: How do you install the Backup Lamp Bulb?
A:
You need to install the bulb, the lens, and the screws.
Q: How do you install the Battery Positive Cable Extension Cable Junction Block?
A:
You need to position the positive extension cable, connect the wiring harness clips, install the battery positive cover to the UBEC, the air cleaner outlet duct, and the air cleaner assembly, and connect the negative battery cable lastly.