Part Description: 2009 Chevrolet Express 2500 Track Bracket
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 Track Bracket
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 Track Bracket
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$88.45MSRP: $133.44
You Save: $44.99 (34%)
FAQ for Sliding Door Roller Repair
Q: How can you get access to the Rear Side Door Center Roller Bracket?
A:
You need to remove the sliding door trim panel first.
By Bob
GM Specialist
08/02/2022
Q: How do you install the Rear Side Door Upper Roller Bracket Garnish Molding?
A:
You need to install the upper roller bracket cover and engage the retaining clips.
By Omar
GM Specialist
07/02/2022
Q: What do you need to remove to access the Rear Side Door Upper Roller Bracket?
A:
You need to remove the sliding side door upper roller bracket cover.
By Omar
GM Specialist
04/02/2022
Q: What is the recommended torque for the bolts retaining the sliding side door lower roller bracket?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Omar
GM Specialist
03/02/2022
Q: What is the recommended torque for the bolts retaining the upper roller bracket?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Omar
GM Specialist
03/02/2022
Q: What is the recommended torque for the nuts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
02/02/2022
Q: What is the removal procedure for the Rear Side Door Upper Roller Bracket Garnish Molding?
A:
Disengage the retaining clips, and remove the upper roller bracket cover.
By Omar
GM Specialist
30/01/2022
See more FAQs (2)
FAQ for Other Repair Info
Q: How do you install the Door Lock Cylinder?
A:
You need to install the lock cylinder rod, the front Door Lock Cylinder, the front door lock cylinder retainer, the front door water deflector, and the front door panel.
Q: How do you install the Door Lock Switch?
A:
You need to install the power Door Lock Switch, engage the retaining tabs, the electrical connector, and the front door trim plate.
Q: How can you perform to ensure the lock fully engages the striker?
A:
You can add or delete spacers behind the striker to accomplish this adjustment.