FAQ for Power Steering Hose Repair
Q: Can you reuse the clamps in the service procedure for the Power Steering Fluid Reservoir Inlet Hose?
A:
No, do not reuse clamps.
By BobGM Specialist
08/02/2022 Q: How do you install the Power Steering Fluid Reservoir Outlet Hose?
A:
You need to install the power steering reservoir outlet hose and bleed the power steering system.
By BobGM Specialist
07/02/2022 Q: What do you need to do before lifting the vehicle during the removal of the Power Steering Cooler Pipe/Hose (GT5)?
A:
You need to install the drain pan under the vehicle.
By BobGM Specialist
04/02/2022 Q: What is the Power Steering Hose Disconnected Caution?
A:
Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.
By OmarGM Specialist
04/02/2022 Q: What is the recommended torque for the power steering cooler mounting bolts?
A:
The recommended torque is 5 Nm (44 lb in).
By OmarGM Specialist
01/02/2022 Q: What is the recommended torque for the power steering cooler mounting nuts?
A:
The recommended torque is 28 Nm (21 lb-ft).
By BobGM Specialist
01/02/2022 Q: What is the removal procedure for the Power Steering Fluid Reservoir Outlet Hose?
A:
Siphon the power steering fluid, disconnect and remove the power steering reservoir outlet hose.
By OmarGM Specialist
31/01/2022 Q: Why do you need to cap the power steering cooler ends?
A:
To prevent the entry of dirt.
By BobGM Specialist
25/01/2022 See more FAQs (3)