Part Description: 2009 Chevrolet Express 2500 Seat Switch
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 Adjuster Switch
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$169.71MSRP: $255.98
You Save: $86.27 (34%)
FAQ for Power Seat Switch Repair
Q: How do you install the Inflatable Restraint Seat Position Sensor?
A:
You need to install the seat position sensor, and the rivets, connect the electrical connector and install the passenger seat.
By Bob
GM Specialist
07/02/2022
Q: What is the recommended torque for the screws?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/02/2022
Q: What is the removal procedure for the Inflatable Restraint Seat Position Sensor?
A:
Remove the seat, disconnect the electrical connector, drill out the rivets, and remove the seat position sensor.
By Omar
GM Specialist
31/01/2022
FAQ for Other Repair Info
Q: How do you install the Power Mirror Switch?
A:
You need to install the power Mirror Switch, engage the retaining tabs, the electrical connector, and the front door trim plate.
Q: How do you install the Backup Lamp Bulb?
A:
You need to install the bulb, the lens, and the screws.
Q: How do you install the Battery Positive Cable Extension Cable Junction Block?
A:
You need to position the positive extension cable, connect the wiring harness clips, install the battery positive cover to the UBEC, the air cleaner outlet duct, and the air cleaner assembly, and connect the negative battery cable lastly.