FAQ for Hvac Control Module Repair
Q: How do you install the Auxiliary Heater and Air Conditioning Control - Front?
A:
You need to connect the electrical connector and install the front control switch and the front control switch bezel.
By OmarGM Specialist
08/02/2022 Q: How do you install the Auxiliary Heater and Air Conditioning Control- Rear?
A:
You need to install the HVAC control assembly, connect the electrical connectors, and install the front headliner.
By BobGM Specialist
08/02/2022 Q: How do you install the Auxiliary HVAC Control Processor?
A:
You need to install the HVAC control processor to the HVAC processor case, the HVAC control processor access cover, and the front headliner.
By BobGM Specialist
08/02/2022 Q: How many rubber retainers?
A:
There are 3 rubber retainers.
By OmarGM Specialist
06/02/2022 Q: What can you remove to access the Heater and Air Conditioning Control Vacuum Pump?
A:
You need to remove the air cleaner.
By BobGM Specialist
04/02/2022 Q: What do you need to remove to access the Auxiliary HVAC Module?
A:
You need to remove the left rear quarter trim panel.
By BobGM Specialist
04/02/2022 Q: What is the recommended torque for the retaining nut to the auxiliary evaporator underbody rear tube assembly?
A:
The recommended torque is 28 Nm (21 lb-ft).
By BobGM Specialist
01/02/2022 Q: What is the recommended torque for the retaining screw?
A:
The recommended torque is 2 Nm (18 lb in).
By BobGM Specialist
01/02/2022 Q: What is the recommended torque for the vacuum pump retaining bolts?
A:
The recommended torque is 3 Nm (27 lb in).
By OmarGM Specialist
31/01/2022 Q: What is the removal procedure for the Auxiliary Heater and Air Conditioning Control-Front?
A:
Remove the front control switch bezel, and the front control switch, and disconnect the electrical connector.
By BobGM Specialist
31/01/2022 See more FAQs (7)