Part Description: 2009 Chevrolet Express 2500 Latch
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 Latch
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
$79.55MSRP: $120.02
You Save: $40.47 (34%)
FAQ for Hood Latch Repair
Q: How do you adjust the hood latch?
A:
You can adjust the hood latch to the left or the right until the striker in the hood easily engages the latch. next, adjust the hood latch height. and, adjust the front hood bumpers to ensure that the top of the hood is flush with the fenders.
By Bob
GM Specialist
08/02/2022
Q: How do you install the Hood Latch Cover?
A:
You need to install the hood latch cover, the push pin rivet retainer, and the radiator grille.
By Omar
GM Specialist
07/02/2022
Q: How do you install the Hood Rear Seal?
A:
You need to align the slot in the rear hood seal with the cowl pinch-weld flange and install the rear hood seal.
By Omar
GM Specialist
07/02/2022
Q: What is the recommended torque for the bolts retaining the hood latch?
A:
The recommended torque is 15 Nm (11 lb-ft).
By Bob
GM Specialist
03/02/2022
Q: What is the removal procedure for the Hood Latch Cover?
A:
Support the hood, remove the radiator grille, the push pin rivet retainers, and the hood latch cover.
By Omar
GM Specialist
31/01/2022
Q: What is the removal procedure for the Hood Rear Seal?
A:
Pull up on the rear hood seal, and remove the rear hood seal.
By Omar
GM Specialist
31/01/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How do you install the Hood Primary Latch Release Cable?
A:
You need to install the cable, the cable grommet, the cable handle, the screws, the left-side hinge pillar trim panel, and the cable.