Part Description: 2009 Chevrolet Express 2500 Handle
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Other Names: Control Assembly, Handle, Release Handle
Item Dimensions: 12.7 x 12.5 x 4.1 inches
Item Weight: 1.20 Pounds
Replaces: 20920593, 25911269, 25782176, 15941776
Part Description: 2009 Chevrolet Express 2500 Release Handle
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
Part Description: 2009 Chevrolet Express 2500 Handle, Outside
More Info
Vehicle Fitment
2009 Chevrolet Express 2500 | Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
$47.60MSRP: $68.41
You Save: $20.81 (31%)
FAQ for Exterior Door Handle Repair
Q: How many are the intermediate side door lock bolts?
A:
There are 2 intermediate side door lock bolts.
By Bob
GM Specialist
07/02/2022
Q: What can you remove to access the Door Outside Handle in the removal?
A:
You can remove the front door trim panel.
By Bob
GM Specialist
04/02/2022
Q: What is the recommended torque for the nuts that retain the outside door handle?
A:
The recommended torque is 11 Nm (97 lb in).
By Omar
GM Specialist
02/02/2022
Q: What is the recommended torque for the nuts?
A:
The recommended torque is 11 Nm (97 lb in).
By Omar
GM Specialist
02/02/2022
Q: What is the service procedure for the Intermediate Side Door Outside Handle?
A:
First, remove the intermediate side door trim panel, left rear front. Second, remove the intermediate side water deflector. And lastly, tighten the intermediate side door lock bolt to 10 Nm (89 Ib in).
By Bob
GM Specialist
29/01/2022
FAQ for Other Repair Info
Q: How do you install the Door Lock Cylinder?
A:
You need to install the lock cylinder rod, the front Door Lock Cylinder, the front door lock cylinder retainer, the front door water deflector, and the front door panel.
Q: How do you install the Door Lock Switch?
A:
You need to install the power Door Lock Switch, engage the retaining tabs, the electrical connector, and the front door trim plate.
Q: How can you get access to the Rear Side Door Center Roller Bracket?
A:
You need to remove the sliding door trim panel first.