FAQ for Driveshaft Repair
Q: How do you remove the propeller shaft?
A:
You can remove it by sliding it rearward from the transmission.
By OmarGM Specialist
07/02/2022 Q: In which situation will you hear the ping, snap or click?
A:
It can be heard on the initial load after the transmission is in gear, either forward or reverse.
By OmarGM Specialist
05/02/2022 Q: Is the vehicle lifted when removing the One-Piece Propeller Shaft?
A:
Yes, you need to raise the vehicle.
By OmarGM Specialist
04/02/2022 Q: What categories can propeller shaft symptoms be classified into?
A:
It can be classified into three categories: leaks, noises, and vibrations.
By OmarGM Specialist
04/02/2022 Q: What is the recommended torque for the bolts when installing the yoke retainers?
A:
The recommended torque is 25 Nm (18 lb-ft).
By BobGM Specialist
03/02/2022 Q: What is the recommended torque for the propeller shaft hanger bolt?
A:
The recommended torque is 52 Nm (38 lb-ft).
By OmarGM Specialist
01/02/2022 Q: What is the recommended torque for the propeller shaft retainer bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By BobGM Specialist
01/02/2022 Q: What is the recommended torque for the retaining bolts?
A:
The recommended torque is 25 Nm (18 lb-ft).
By OmarGM Specialist
01/02/2022 Q: What kind of tools are required when removing the Propeller Shaft Boot?
A:
J43218 Clamp Pliers-Narrow Jaw.
By BobGM Specialist
27/01/2022 Q: What should you notice when placing an alignment mark between the rear inner tube and the rear axle pinion yoke?
A:
You need to know that the splines of the prop shaft are not keyed.
By BobGM Specialist
26/01/2022 See more FAQs (10)