FAQ for Brake Pad Set Repair
Q: How should you deal with the brake caliper properly in the replacement?
A:
Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected.
By BobGM Specialist
06/02/2022 Q: Should you remove the brake caliper guide pins?
A:
No, do not remove the brake caliper guide pins unless a replacement is required.
By OmarGM Specialist
04/02/2022 Q: What is the recommended torque for the brake caliper bracket bolts?
A:
The recommended torque is 300Nm (221 lb-ft).
By BobGM Specialist
03/02/2022 Q: What is the recommended torque for the brake pedal bracket bolt?
A:
The recommended torque is 33 Nm (24 lb-ft).
By OmarGM Specialist
03/02/2022 Q: What is the recommended torque for the power brake booster nuts?
A:
The recommended torque is 36 Nm (27 lb-ft).
By BobGM Specialist
01/02/2022 Q: What should you do when the engine is off in the installation procedure for the Rear Disc Brake Pads (With a Single Rear Wheel)?
A:
You need to gradually apply the brake pedal to approximately 2/3 of its travel distance, and then slowly release the brake pedal.
By BobGM Specialist
26/01/2022 Q: Why it is necessary to burnish the brake pads and brake rotors?
A:
Ensure that the braking surfaces are properly prepared after service has been performed on the disc brake system.
By BobGM Specialist
25/01/2022 See more FAQs (2)