Part Description: 2009 Chevrolet Equinox Knob Asm-Automatic Transmission Control Lever
More Info
Vehicle Fitment
2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Shift Knob Repair
Q: What is the transmission control lever knob service procedure?
A:
Tighten the shift control lever knob screw to 1.5 Nm and loosen the shift control lever knob screw to 4-5 turns.
By Bob
GM Specialist
02/11/2022
Q: What is the transmission control bracket service procedure?
A:
First, disable the SIR system and remove the shift control lever knob. Next, remove the console and the shift control. Tighten the shift control bracket bolts to 25 Nm and the shift control bracket nut to 25 Nm as well.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the front floor console front cup holder installation procedure?
A:
First, install the Cup Holder on the track and position the track in the console assembly. Next, install the console track screws and tighten them to 2.5 Nm. Snap the cupholder cover in place and inspect for proper installation.
Q: What is the center pillar upper garnish molding service procedure?
A:
Remove the front seat belt adjuster cover, bolt, and guide. Next, remove the center pillar lower garnish molding.
Q: What is the preliminary procedure for the Rear Seat Cushion Cover and Pad?
A:
You need to remove the rear seat, disconnect the rear seat cushion cover retainers from the rear seat cushion frame, and remove the rear seat buckle assembly.