2009 Chevrolet Equinox | LT, LTZ, Sport | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
FAQ for Oil Pan Repair
Q: What is the oil pan installation procedure?
A:
Install the 8 mm guides from EN 46109 into the center oil pan bolt hole on each side. Install the oil pan bolts, the air conditioning compressor, and the catalytic converter.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the engine oil and oil filter installation procedure?
A:
First, lubricate the new Oil Filter gasket with clean engine oil and tighten the oil filter to 30 Nm. Lower the vehicle, refill the engine oil, and start the engine.
Q: What is the oil filter adapter installation procedure?
A:
Place a new Oil Filter Adapter gasket onto the oil filter adapter and install the oil filter adapter bolts. Tighten the bolts to 23 Nm and install a new oil filter. Next, install the generator.
Q: What is the oil level indicator tube installation procedure?
A:
First, install a new seal on the oil level indicator. Next install the oil level indicator tube, and the indicator bolt and tighten the bolt to 10 Nm. Finally, install the oil lever indicator in the oil level indicator tube.