2009 Chevrolet Equinox Heater Core

Install the Blower Motor to the HVAC module, install the blower motor screws to the HVAC module and tighten to 1.5 Nm. Next, connect the electrical connector to the blower motor and install the right sound insulator panel.

First, install the condenser to the lower retention clips on the radiator, install the bolts to retain the top of the condenser to the radiator, and tighten to 9 Nm. Next install the CRFM brackets to the vehicle, the CRFM bracket bolts to the radiator, and tighten the bolts to 20 Nm. After that, install a new sealing washer to the compressor hose, install the compressor hose to the condenser, install the compressor hose nut and tighten to 20 Nm. Next, install a new seal washer to the liquid line, install the liquid line to the condenser, install the liquid line nut and tighten to 20 Nm. Finally install the CRFM closeout panel, the battery box air duct, and the front fascia.

First, install the clutch field coil to the compressor, install the clutch field coil screws to the compressor and tighten the screws to 4.9 Nm. Next, install the compressor pulley to the compressor, install the snap ring to the compressor pulley and install the compressor clutch shims to the compressor shaft. Install the compressor and install the compressor clutch to the compressor. Tighten the clutch bolt to 21 Nm and install the compressor to the vehicle.