< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Equinox
< Back to View All
Cooling Systems, Fans & Radiators
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Equinox Bracket Bolt
PartNumber: 11516328
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 2.8 x 2.5 x 2.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10141996, 10192645, 11516548, 11507023, 12337993, 11514121, 11516348, 11508932
- Part Description: 2009 Chevrolet Equinox Bracket Bolt
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$3.21 MSRP:$5.08You Save: $1.87 (37%)
OEM (Genuine) 2009 Chevrolet Equinox Radiator Inlet Hose (Upper)
PartNumber: 19130546
Product Specifications- Notes: Equinox, Torrent; 3.6l; 3.6 Liter
- Other Names: Upper Hose
- Item Dimensions: 15.8 x 6.9 x 3.0 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15889017
- Part Description: 2009 Chevrolet Equinox Radiator Inlet Hose (Upper)
Vehicle Fitment- 2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Radiator Inlet Hose (Upper)
PartNumber: 15781526
Product Specifications- Notes: Equinox, Torrent; 3.4l; 3.4 Liter
- Other Names: Upper Hose
- Item Dimensions: 14.9 x 6.7 x 1.5 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Radiator Inlet Hose (Upper)
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Lower Hose
PartNumber: 15889011
Product Specifications- Notes: Equinox, Torrent; 3.6l; 3.6 Liter
- Item Dimensions: 24.1 x 7.9 x 4.3 inches
- Item Weight: 1.20 Pounds
- Replaces: 19130348
- Part Description: 2009 Chevrolet Equinox Lower Hose
Vehicle Fitment- 2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Chevrolet Equinox Radiator Outlet Hose (Lower)
PartNumber: 15781527
Product Specifications- Notes: Equinox, Torrent; 3.4l; 3.4 Liter
- Other Names: Lower Hose
- Item Dimensions: 14.0 x 4.2 x 3.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Radiator Outlet Hose (Lower)
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
FAQ for Coolant Hose Repair
Q: What is the engine coolant air bleed pipe installation procedure?
A:
First install the coolant air bleed pipe to the engine, install the coolant air bleed pipe bolts and tighten the bolt to 10 Nm. Install the coolant air bleed hose to the coolant air bleed pipe and install the surge tank inlet hose. Finally, install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the thermal bypass fitting installation procedure?
A:
Install the thermal bypass fitting, and the thermal bypass fitting bolt and tighten to 12 Nm. Next, install the heater outlet hose to the thermal bypass fitting and install the bypass hose to the thermal bypass fitting. Finally, install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the thermal bypass pipe installation procedure?
A:
Install the thermal bypass pipe using J 21882. Next, install the thermal bypass pipe bolt and tighten it to 10 Nm. Install the bypass hose and the upper intake manifold.
By Bob
GM Specialist
01/11/2022Q: What is the heater outlet hose installation procedure?
A:
Install the heater outlet hose, outlet hose clamps, and the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the heater inlet pipe installation procedure?
A:
Install a new heater inlet pipe housing seal, install the heater inlet pipe housing bolt and tighten the bolt to 10 Nm. Next, install the heater inlet hose to the heater inlet pipe.
By Bob
GM Specialist
01/11/2022Q: What is the heater outlet pipe installation procedure?
A:
Install a new heater inlet pipe O-ring and the heater outlet pipe. Next, install the heater outlet hose to the heater outlet pipe and install the heater inlet pipe.
By Bob
GM Specialist
01/11/2022Q: What is the thermal bypass hose installation procedure?
A:
First, install the thermal bypass pipe hose and fill the cooling system. Next, install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022See more FAQs (2)