Part Description: 2009 Chevrolet Equinox Posi Quiet™ Semi-Metallic Brake Pads
Vehicle Fitment
2009 Chevrolet Equinox | All Trims | All Engines
FAQ for Brake Pad Set Repair
Q: What is the brake pad and rotor burnishing procedure?
A:
First, accelerate the vehicle to 48 km/h and use pressure to apply the brakes to bring the vehicle to a stop.
By Bob
GM Specialist
01/11/2022
Q: What is the front disc brake pads service procedure?
A:
Turn the engine off and slowly release the brake pedal. Next, wait 15 seconds and repeat steps 2-3 until a firm brake pedal is obtained. After that fill the master cylinder reservoir and burnish the pads/rotors.
By Bob
GM Specialist
01/11/2022
Q: What is the rear disc brake pads service procedure?
A:
Make sure to mark the position of the brake pads and springs. Next position the pad with the wear indicator facing the inboard surface of the brake rotor. Tighten the guide pin bolt to 27 Nm.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the rear brake caliper bracket service procedure?
A:
Make sure to tighten the Brake Caliper guide pin bolts to 27 Nm and tighten the disc brake caliper bracket bolts to 120 Nm.
Q: What is the front brake rotor service procedure?
A:
Tighten the brake rotor retaining screws to 10 Nm.