< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Equinox
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Equinox Side Sensor
PartNumber: 25758127
Product Specifications- Notes: 2nd Design
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.1 x 2.2 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Side Sensor
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)
OEM (Genuine) 2009 Chevrolet Equinox Indicator Asm-Inflator Restraint Instrument Panel Module
PartNumber: 15797467
Product Specifications- Notes: Equinox, Torrent
- Other Names: Front Sensor
- Item Dimensions: 5.4 x 3.3 x 2.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Equinox Indicator Asm-Inflator Restraint Instrument Panel Module
Vehicle Fitment- 2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
FAQ for Air Bag Sensor Repair
Q: What components should be replaced after a collision involving side airbag deployment?
A:
You should replace the inflatable restraint side impact sensors (SIS), left/right, on the side of the impact. the inflatable restraint roof rail module, left/right, on the side of the impact. the inflatable restraint SDM. and the inflatable restraint seat belt pretensioner.
By Bob
GM Specialist
01/11/2022Q: What components should be replaced after a collision involving airbag deployment?
A:
You should replace the inflatable restraint I/P module if deployed and after performing the necessary inspections listed above. the inflatable restraint steering wheel module. inflatable restraint SDM. inflatable restraint front end sensor, left/right. and inflatable restraint seat belt pretensioners.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint roof-side rail module service procedure?
A:
Disable the SIR system and remove the headliner. Disconnect the electrical connector, and remove all clips and plastic guides from the structure. Tighten the inflatable restraint roof rail module bolts to 5 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint side impact sensor service procedure?
A:
First, slide the sensor into the grooves in the sheet metal. Next, disconnect the electrical connector. Tighten the inflatable restraint side impact sensor bolts to 10 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint front-end sensor service procedure?
A:
First, remove the connector position assurance retainer and disconnect the electrical connector. Tighten the supplemental inflatable restraint front end discriminating sensor bolts to 8 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the inflatable restraint vehicle rollover sensor service procedure?
A:
Disconnect the electrical connectors and tighten the inflatable restraint vehicle rollover sensor nuts to 10 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to disable the Negative Battery Cable?
A:
You should turn the steering wheel so that the vehicle's wheels are pointing straight ahead, then place the ignition in the OFF position, disconnect the negative battery cable from the battery, and finally wait 1 minute before working on the system.
By Bob
GM Specialist
28/10/2022Q: What is the inflatable restraint sensing and diagnostic module service procedure?
A:
Disable the SIR system and remove the center console. Tighten the inflatable restraint sensing and diagnostic module nuts to 5 Nm.
By Bob
GM Specialist
28/10/2022Q: How to enable the Air Bag Fuse?
A:
You need to place the ignition in the OFF position, install the fuse(s) supplying power to the SDM., then turn the ignition switch to the ON position, and perform the Diagnostic System Check-Vehicle if the AIR BAG warning indicator does not operate as described.
By Bob
GM Specialist
28/10/2022See more FAQs (4)