Part Description: 2009 Chevrolet Equinox A/C Receiver Drier
More Info
Vehicle Fitment
2009 Chevrolet Equinox | All Trims | 6 Cyl 3.4L
2009 Chevrolet Equinox | All Trims | 6 Cyl 3.6L
FAQ for A/C Receiver Drier Repair
Q: What is the receiver and dehydrator installation procedure?
A:
First, install new O-rings to the receiver dehydrator and install the receiver dehydrator to the condenser. Next, install the lower receiver dehydrator bolt to the condenser and tighten the bolt to 6.5 Nm. Install the receiver dehydrator mounting clamp/bolt to the condenser and tighten the bolt to 4.2 Nm. Install the front bumper fascia, and evacuate and charge the A/C system.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the blower motor installation procedure?
A:
Install the Blower Motor to the HVAC module, install the blower motor screws to the HVAC module and tighten to 1.5 Nm. Next, connect the electrical connector to the blower motor and install the right sound insulator panel.
Q: What is the heater core installation procedure?
A:
First, install the Heater Core to the HVAC module and install the heater core cover to the HVAC module. Next, install the heater core cover screws and tighten them to 1.5 Nm. Finally, install the HVAC module in the vehicle.
Q: What is the air conditioning condenser installation procedure?
A:
First, install the condenser to the lower retention clips on the radiator, install the bolts to retain the top of the condenser to the radiator, and tighten to 9 Nm. Next install the CRFM brackets to the vehicle, the CRFM bracket bolts to the radiator, and tighten the bolts to 20 Nm. After that, install a new sealing washer to the compressor hose, install the compressor hose to the condenser, install the compressor hose nut and tighten to 20 Nm. Next, install a new seal washer to the liquid line, install the liquid line to the condenser, install the liquid line nut and tighten to 20 Nm. Finally install the CRFM closeout panel, the battery box air duct, and the front fascia.