FAQ for Alloy Wheels Repair
Q: Can the bent rim flanges be repaired or refinished?
A:
Any bent rim flanges should not be repaired or refinished and should be discarded.
By OmarGM Specialist
24/11/2021 Q: What are the three main steps of tire puncture repair?
A:
The three basic steps are removing and inspecting the tire, filling the puncture, and sealing the inner liner to prevent air loss.
By BobGM Specialist
19/11/2021 Q: How do you properly clean a tire?
A:
You properly clean a tire with a liner cleaner, cloth, and a scraper to remove dirt and debris.
By BobGM Specialist
19/11/2021 Q: How do you clean the puncture mark?
A:
You clean the puncture site by using a hand reamer and reaming the puncture to be able to fill the hole.
By OmarGM Specialist
19/11/2021 Q: What are some areas that should be checked before getting a wheel balanced?
A:
Before getting a wheel balanced it is important to check for missing balance weights, bent rims, tire wear, bead seating, stones in the tire tread, and tire irregularities.
By OmarGM Specialist
18/11/2021 Q: What benefits does using nitrogen gas on vehicles have?
A:
It helps with the reduction in the loss of tire pressure, in the variance of tire pressures with temperature changes, and long-term rubber degradations decrease due to oxygen concentrations.
By OmarGM Specialist
18/11/2021 Q: What is the maximum amount of corrosion that can be repaired?
A:
On a vehicle with less than 20,000 miles, the repairable corrosion would be 100mm or less. On a vehicle with more than 20,000 miles, the repairable corrosion would be 200mm.
By OmarGM Specialist
18/11/2021 Q: What is the proper way to fix the air leaking from the wheel/tire caused by corrosion?
A:
Awater dunk tank leak test will need to be performed so you can determine where the leak is coming from, whether from the tire or the wheel itself. Once the affected area is found, you will need to sand the corrosion down until you get to material that is stable enough to finish correctly patching the wheel. After correctly patching the area, you will need to add sealant so that it fills the resurfaced bead.
By OmarGM Specialist
18/11/2021 Q: What causes air to leak out of a tire slowly?
A:
Air leaking from a tire is caused by many factors such as particles getting in between the tire and the wheel where the bead seats. Another factor for leaking tires is corrosion on the wheel itself which is causing surface imperfections allowing air to be leaking.
By OmarGM Specialist
18/11/2021 Q: Does the wheel/tire need to be rebalanced after getting the wheel repaired?
A:
Yes, the wheel will need to be rebalanced to avoid premature wear on the tires.
By OmarGM Specialist
18/11/2021 See more FAQs (12)