Other Names: Crossmember, Transmission Crossmember
Item Dimensions: 49.4 x 6.1 x 6.3 inches
Item Weight: 23.30 Pounds
Fitment Type: Direct Replacement
Part Description: 2009 Chevrolet Colorado Transmission Crossmember
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Transmission Crossmember
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Transmission Mount
More Info
Vehicle Fitment
2009 Chevrolet Colorado | All Trims | 8 Cyl 5.3L
FAQ for Transmission Mount Repair
Q: What is the transmission mount service procedure?
A:
Install the transmission mount spacer, the mount spacer bolts, and the transmission mount. Next, install the bolts and tighten them to 55 Nm. After that, lower the transmission, install the 2 nuts and tighten to 57 Nm.
By Bob
GM Specialist
01/11/2022
Q: What is the transmission mount installation procedure?
A:
Install the mounting spacer, the transmission mount to the vehicle, and the transmission bolts and tighten to 55 Nm. Next, lower the transmission and install the two nuts.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the transmission control module service procedure?
A:
Disconnect the TCM electrical connector and twist the Transmission Control Module electrical connector while disconnecting.
Q: What is the automatic transmission fluid and filter installation procedure?
A:
Install the new filter seal and the new filter into the transmission case. Next, install the oil pan and a new gasket. Install the oil pan bolts and tighten them to 16 Nm. After that install the transmission range selector cable bracket bolts and tighten them to 25 Nm.
Q: What is the transmission fluid cooler hose/pipe installation procedure?
A:
First, install the transmission fluid cooler lines to the vehicle. Next, install the transmission fluid cooler lines to the transmission. Install the transmission support and the engine protection shield.