< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Colorado
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Colorado Gear Assembly
PartNumber: 15951338
Product Specifications- Notes: W/O 4WD, Z85
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 29.6 x 7.4 x 6.9 inches
- Item Weight: 7.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25817575, 15864178, 15921544
- Part Description: 2009 Chevrolet Colorado Gear Assembly
Vehicle Fitment- 2009 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$451.30 MSRP:$746.95You Save: $295.65 (40%)OEM (Genuine) 2009 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
PartNumber: 25912269
Product Specifications- Notes: W/4WD;W/O 4WD, Z71; Canyon, Colorado; 2WD; Chassis Pkg.;Canyon, Colorado; 2WD; Off Road Pkg.;Canyon, Colorado; 4WD
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 64.1 x 13.5 x 12.2 inches
- Item Weight: 24.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
Vehicle Fitment- 2009 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$505.71 MSRP:$954.18You Save: $448.47 (48%)OEM (Genuine) 2009 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
PartNumber: 15951337
Product Specifications- Notes: W/O 4WD, Zq8; Canyon, Colorado; 2WD; Sport Chassis Pkg.
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 61.6 x 12.1 x 10.2 inches
- Item Weight: 20.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Gear Asm-Steering (W/ Steering Linkage Tie Rod)
Vehicle Fitment- 2009 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Steering Gearbox Repair
Q: What is the steering gear cylinder pipe assembly and seal assembly procedure?
A:
First inspect the cylinder lines for cracks, dents, and damage to the threads. Replace the parts as needed and install the new O-ring seals to the valve end of the cylinder lines. Next, install the cylinder lien assemblies to the gear assembly. Make sure to tighten the valve end fittings and the cylinder end fittings to 15 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the steering gear boot and breather tube assembly procedure?
A:
Install the new boot clamp onto the rack and pinion boot. Next, install the rack and pinion boot onto the inner tie rod assembly. Install the hexagon jam nut to the inner tie rod assembly.
By Bob
GM Specialist
01/11/2022Q: What is the steering gear rack bearing preload adjustment procedure?
A:
First, loosen the adjuster plug lock nut, tighten the adjuster plug to 15 Nm and tighten the adjuster plug lock nut to 60 Nm.
By Bob
GM Specialist
01/11/2022Q: What is the steering gear installation procedure?
A:
Install the cross-member, install the steering gear vertical mounting nuts, and the intermediate shaft to the steering gear. Next install the coupler clamp bolt to the intermediate shaft, connect the power steering hose assembly to the steering gear, and install the engine protection shield. Install the outer tie rod end and both of the front tire/wheel assemblies.
By Bob
GM Specialist
01/11/2022