Part Description: 2009 Chevrolet Colorado OE Type Oxygen Sensor
More Info
Vehicle Fitment
2009 Chevrolet Colorado | All Trims | 4 Cyl 2.9L
2009 Chevrolet Colorado | All Trims | 5 Cyl 3.7L
$38.74
FAQ for Oxygen Sensor Repair
Q: What is the heated oxygen sensor installation procedure?
A:
Install the HO2S and tighten the sensor to 42 Nm. Next route the HO2S wiring under the rear HO2S electrical connector. Connect the HO2S electrical connector to the engine wiring harness electrical connector and lower the vehicle.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the engine oil and oil filter installation procedure?
A:
Install a new Oil Filter and tighten it to 30 Nm. Tighten the oil pan drain plug to 25 Nm. Next, remove the oil drain pan from under the vehicle and inspect for oil leaks. Inspect for oil leaks and install the oil level indicator.
Q: What is the oil filter adapter installation procedure?
A:
Install the Oil Filter Adapter and tighten it to 55 Nm. Next, lubricate the oil filter seal with clean engine oil, install the oil filter and tighten to 30 Nm.
Q: What are the valve rocker arm and push rod installation procedures?
A:
First, install the rocker arm pivot support, the Pushrods, and the rocker/bolts. Next, install the number one cylinder spark plug and the rocker arm cover.