Apply a 5 mm bead of sealant 20 mm long to the engine block. Install the oil pan, oil pan gasket, and bolts to the engine block. Next, install the 2 lower bellhousing bolts and the 2 lower A/C compressor bracket bolts and tighten them to 50 Nm. After that, install the battery cable channel to the oil pan, and the battery cable channel bolt to the oil pan and tighten to 12 Nm. Install the flywheel inspection cover, the starter, and the inner axle shaft. Finally, fill the engine with oil and install the front differential.
By BobGM Specialist
01/11/2022