Part Description: 2009 Chevrolet Colorado Run Lamp Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Lower Beam Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado High Beam Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Bulb, Front Turn Signal Lamp
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Stoplamp Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: Discontinued; 12V; 55W; Halogen; Pair - Plastic case; Off-Road Use Only
UPC: 760687147176
Part Description: 2009 Chevrolet Colorado Headlight Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | All Trims | All Engines
FAQ for Headlight Bulbs Repair
Q: What is the headlamp bulb installation procedure?
A:
Install the bolts that retain the headlamp and tighten the bolts to 10 Nm. Next, install the front grille.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the park/turn signal/side marker lamp bulb installation procedure?
A:
First, secure the bulb into the bulb sockets and the lamp assembly. Next insert the inside edge of the lamp tabs into the grille support. Rotate the lamp assembly and push on the outboard edge of the lamp.
Q: What is the front fog lamp bulb service procedure?
A:
Remove the LF or RF wheelhouse liner and disconnect the harness from the bulb socket. Next rotate the bulb socket counter-clockwise and remove it from the projector housing.
Q: What is the tail lamp bulb installation procedure?
A:
First, install the bulbs to the rail lamp and install the tail lamp sockets to the tail lamp. Next, install the tail lamp screws to the tail lamp and tighten it to 3 Nm.